Tyre shelf unit, zinc plated ,single sided

Tyre shelf unit, zinc plated, single sided, 7 levels, extension shelf unit.

Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments.

The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed.

Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.