push button switches & components  (13,648 offers of 6,349,343 product items)

Accessory Type = Pushbutton Actuator For Use With = Series 31 Operating Mode = Momentary

Accessory Type = Pushbutton Actuator Operating Mode = Momentarymm

The EAO Series 84 Halo range is a modular switch range. To have a complete switch, you would require to select a lens (RS Stock number ; 111-5930 111-5930 Typical), actuator (RS Stock number ; 903-...

Switching element required for complete switch see stock no's ; 6906941 6906941 and ; 6906948 6906948. Pushbutton Switches Series 71 (PCB mount). The compact, oil ; watertight switch is ideally sui...

Full Face Flush Illuminated Switch. Brought to you by EAO, this selection of illuminated push-button switches feature full-face, high brightness LED illumination. Low profile with a flush fitting, ...

EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For ...

These switches are complete with a bezel for flush mounting. The 25mm diameter bezels are available in either plastic or aluminium. If they are to be used as raised switches, then a 16.5mm diameter...

These switches are complete with a bezel for flush mounting. The 25mm diameter bezels are available in either plastic or aluminium. If they are to be used as raised switches, then a 16.5mm diameter...

Full Face Flush Illuminated Switch. Brought to you by EAO, this selection of illuminated push-button switches feature full-face, high brightness LED illumination. Low profile with a flush fitting, ...

Full Face Flush Illuminated Switch. Brought to you by EAO, this selection of illuminated push-button switches feature full-face, high brightness LED illumination. Low profile with a flush fitting, ...

SEV, UL, CSA, NEMKO, VDE. Pushbutton body Non-Illuminated Flush Mount - series 04. Round-fronted pushbutton bodies, Ø 35 mm for panel mounting Contact block must be ordered separately IP65 rated ab...

For a complete switch a contact block is required, see typically ; 2790143 2790143. Round Raised Mount Pushbutton Switches (Series 04). Raised mount switch bodies complete with a red, yellow or gre...

The EAO Series 84 Halo range is a modular switch range. To have a complete switch, you would require to select a lens (RS Stock number ; 111-5930 111-5930 Typical), actuator (RS Stock number ; 903-...

EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For ...

These switches are complete with a bezel for flush mounting. The 25mm diameter bezels are available in either plastic or aluminium. If they are to be used as raised switches, then a 16.5mm diameter...