metrix  (285 offers of 5,371,754 product items)

The Chauvin Arnoux set of insulated male BNC plug and on opposite side insulated female BNC plug which has 4 mm of diameter with 19 mm of spacing.Red and black colour

Number of Analogue Channels = 2MHz Oscilloscope Form = Digital Storage Series = DOX2100B

OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBI...

The Metrix USB micro SD adapter used with SCOPIX IV oscilloscope.Plug and play Ultra slim Hot swappable

The Chauvin Arnoux EURO socket test lead for MX535 and CA 6133 tester.Black colour lead

The Metrix HX series general purpose probe has bandwidth 15 MHz and attenuation 1:1.Capacitance 45 pF Rise time of 23 ns

The Metrix HX series voltage probes for oscilloscopes attenuate the signal by a factor of 10, with a bandwidth of 150MHz, to be adapted according to the BNC channels of the oscilloscopes.Full integ...

The Metrix HX series electronic voltage probe has bandwidth 100 MHz and attenuation 1:10.Retractable safety sleeve grey colour Rise time of 0.9 ns

30 ; 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes. An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced...

OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBI...

OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBI...

The Chauvin Arnoux USB to RS232 adapter for PC.Blue colour adapter

The Metrix HX0094 with banana connector can be used for 4-20 mA current loop measurement by means of a built-in shunt. It is ideal for applications in the automation and process sectors.Reference c...

The Metrix HX0095 is a 1000V adapter, to be used on SCOPIX oscilloscopes. When connecting the HX0095 to the SCOPIX, safety information is displayed. This information may be different if other Probi...

The Metrix HX0093 is a third-order low-pass filter with the cut-off frequency set to 300 Hz. It can be used to isolate the 50 Hz or 60 Hz fundamental for measurements on PWM-controlled electric mot...