mains test blocks  (18 offers of 5,345,131 product items)

During normal operation, lids and covers ensure protection of the test sockets from dust and unauthorized use. According to the mounting choice, two options available: –– a lid for all types of mou...

Essailec® Current Test Blocks. Make before break Current range colour code: Green Body: Polycarbonate Conductive parts: Gold-plated

Essailec® Voltage Test Blocks. Make before break contacts - opened / closed Voltage range colour code: Grey Body: Polycarbonate Conductive parts: Silver-plated

Voltage Rating = 240 V ac Cable Entry = 4 → 7mm Width = 60mm Height = 48mm Depth = 127mm Maximum Supported Cable = 7mm Minimum Supported Cable = 4mm

Essailec® Voltage Test Blocks. Make before break contacts - opened / closed Voltage range colour code: Grey Body: Polycarbonate Conductive parts: Silver-plated

These units do NOT provide isolation from the mains. Portable Variable Auto Transformers. Ideal for appliance testing and supplying voltage dependent components Output voltmeter ; ammeter Analogue ...

These units do NOT provide isolation from the mains. Portable Variable Auto Transformers. Ideal for appliance testing and supplying voltage dependent components Output voltmeter ; ammeter Analogue ...

Voltage Rating = 240 V ac Cable Entry = 4 → 7mm Corded = Yes Cable Length = 1.5m Width = 60mm Height = 48mm Depth = 127mm Maximum Supported Cable = 7mm Minimum Supported Cable = 4mm

Always connect the earth connection for safety. Always use in conjunction with an RCD; for a suitable device, consider RS ; 825-6093 825-6093. Duty Cycle (per 10 minutes): 16 Amps - 10% 13 Amps - 2...

RS PRO Mains Test Block, 3 Phase Quicktest Introducing the 3 phase quicktest mains test connector from RS PRO, a compact and high quality mains connector ideal for testing unterminated cables up to...

Cliff Electronics Main Test BlockThe Cliff Electronics mains test block has a 5A fuse with a 1.5m cable and EU plug. This connector is the quick test QT1 made from a tough impact-resistant, flame-r...

RS PRO Mains Test Block, Quicktest Introducing the quicktest mains test connector from RS PRO, a compact and high quality mains connector ideal for testing unterminated cables up to 250V AC or 24V ...

The Quicktest is ideal for laboratories and service and test departments where a safe, temporary mains connection to a bare ended cable is required.

CEI EN 60998-1 CEI EN 60998-2-1 CEI EN 60999 CEI EN 60947-7-1. Twin Blocks with Indirect Clamping. The use of Twin-Block terminals is recommended to connect flexible copper cables from 10 to 120 sq...

RS PRO Earth Terminal Block, Screw TerminationEarth terminal blocks let you safely ground/earth a current in a circuit, without the need to run a wire to the main ground/earth connection on a break...