development tools  (8,463 offers of 5,372,313 product items)

The SEGGER J-Link SiLabs C2 Adapter converts the 20-pin, 0.1 inch pitch standard J-Link connector to a 10-pin, 0.1 inch pitch SiLabs C2 connector.Includes 10 pin ribbon cable

The SEGGER Flasher STM8 Adapter converts the standard J-Link 20-pin 0.1″ connector to the SWIM connector and a standard 10-pin connector. In addition the target board can be power using the externa...

RF Technology = Thread, ZigBee Kit Classification = Starter Kit For Use With = Wireless Starter Kit Mainboard Featured Device = Radio Board Kit Name = Wireless Starter Kit

The Silicon Labs LTE-M Expansion Kit is an excellent way to explore and evaluate the Digi XBee3 LTE-M cellular module which allows you to add low-power long range wireless connectivity to your EFM3...

SEGGER Microcontroller AdapterThe SEGGER Microcontroller adapter is J-Trace MICTOR 38 adapter that connects to the 38-pin MICTOR connector. It connects the GND, JTAG and some trace pins to their co...

J-Link ARM7/9/11 14-Pin Adapter. The J-Link 14-Pin Adapter allows J-Link to work with ARM7/9/11 target processors. It is not needed with most new evaluation boards. Supported Probes. J-Link BASE ; ...

RF Technology = RF Transceiver Kit Classification = Radio Board For Use With = EFR32FG Starter Kits Featured Device = EFR32FG14 Kit Name = Wireless Starter Kit With Radio Board

Classification = Development Kit, Evaluation Kit Kit Name = PG22 Dev Kit Technology = Development Kit Device Core = ARM Cortex M33 Processor Family Name = EFM32PG22

J-Link ARM SWD Isolator Board. The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when...

The emPower eval board provides a comprehensive set of SEGGER’s middleware products, accelerating the start of any embedded project. SEGGER’s embOS real-time operating system is at the heart of the...

RF Technology = Radio Kit Classification = Radio Board For Use With = EFR32MG Zigbee and Thread Starter Kit Featured Device = EFR32MG12 Kit Name = Wireless Starter Kit With Radio Board

The SLWRB4308B radio board is available to evaluate and to develop with the +10 dBm TX power variant of the MGM210P and BGM210P modules. Together with a WSTK main board, the Gecko SDK suite, and th...

The SEGGER NAND-Flash EVAL evaluation board is an easy to use and cost effective testing tool designed to permit the evaluation of the features and the performance of the emFile NAND driver with va...

The SHT3x humidity sensor series consists of a low-cost version with the SHT30 humidity sensor, a standard version with the SHT31 humidity sensor, and a high-end version with the SHT35 humidity sen...

The Silicon Labs Z-Wave 700 Wireless Starter Kit includes the Z-Wave software stack, sample code, integrated debug adapter and support for Z-Wave Long Range. A single world-wide development kit for...