| | | | | |
| Picture | | | | Order |
|
|
92% |
|
|
|
from £ 17.47* per piece |
|
92% |
|
|
|
from £ 68.10* per piece |
|
92% |
|
Rittal for Use with Enclosure / 2247077 (1 offer) The Rittal Tension screw with ball bearing is an accessories for hole punches. Required as a connecting part between the die and the stamp.Ø x L 9,5 x 40 mmTension screw (Ø x L): 19 mm x 55 mm |
|
from £ 38.30* per piece |
|
92% |
|
BTR NETCOM M12, 1m (1 offer) Shielded M12 Ethernet connection line - Cat.6A, 8-pole, X-coded - M12 connector, straight on M12 connector, straight - extrusion-coated cable on M12 connectors - stranded wires 4x2xAWG26/7 PiMF - o... |
|
from £ 63.57* per piece |
|
92% |
|
METZ CONNECT 142M2X15010 networking cable Green (1 offer) shielded M12-plug to RJ45-plug connection line Cat.6A, 8-pole, X-coded side 1: M12-plug, straight side 2: RJ45-plug, straight connectors over molded stranded wires 4x2xAWG26/7 PiMF pin assignment p... |
|
from £ 50.25* per piece |
|
92% |
|
Rittal for Use with Enclosure / 2247075 (1 offer) The Rittal Tension screw with ball bearing is an accessories for hole punches. Required as a connecting part between the die and the stamp.Ø x L 9,5 x 40 mmTension screw (Ø x L): 9.5 mm x 50 mm |
|
from £ 13.47* per piece |
|
92% |
|
|
|
from £ 81.32* per piece |
|
92% |
|
|
|
from £ 252.31* per piece |
|
92% |
|
|
|
from £ 69.60* per piece |
|
92% |
|
Rittal for Use with Enclosure / 2247078 (1 offer) The Rittal Tension screw with ball bearing is an accessories for hole punches. Required as a connecting part between the die and the stamp.Ø x L 9,5 x 40 mmTension screw (Ø x L): 19 mm x 75 mm |
|
from £ 46.18* per piece |
|
92% |
|
|
|
from £ 113.04* per piece |
|
92% |
|
Rittal Draw Stud / 2247083 (1 offer) The Rittal hydraulic screw is an accessories for hole punches. Required as a connecting part between the die and the stamp. For operation via hydraulic punchØ / L 6 / 19mmHydraulic tension screw Ø:... |
|
from £ 34.48* per piece |
|
92% |
|
|
|
from £ 46.16* per piece |
|
92% |
|
Rittal for Use with Enclosure / 2247076 (1 offer) The Rittal Tension screw with ball bearing is an accessories for hole punches. Required as a connecting part between the die and the stamp.Ø x L 9,5 x 40 mmTension screw (Ø x L): 11.1 mm x 60 mm |
|
from £ 35.85* per piece |
|
92% |
|
|
|
from £ 30.99* per piece |
|
|