| | | | | |
| Picture | | | | Order |
|
|
94% |
|
2525x30 Taper Bush - Metric Bore (1 offer) 2525x30-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 30mm this Taper Bush offers versatility and reduced fit... |
|
from £ 39.25* per box |
|
94% |
|
2525x32 Taper Bush - Metric Bore (1 offer) 2525x32-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 32mm this Taper Bush offers no costly reboring: full ra... |
|
from £ 36.76* per box |
|
94% |
|
2525x35 Taper Bush - Metric Bore (1 offer) 2525x35-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 35mm this Taper Bush offers versatility and reduced fit... |
|
from £ 39.40* per box |
|
94% |
|
2525x38 Taper Bush - Metric Bore (1 offer) 2525x38-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 38mm this Taper Bush offers no costly reboring: full ra... |
|
from £ 36.73* per box |
|
94% |
|
2525x40 Taper Bush - Metric Bore (1 offer) 2525x40-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 40mm this Taper Bush offers versatility and reduced fit... |
|
from £ 39.32* per box |
|
94% |
|
2525x42 Taper Bush - Metric Bore (1 offer) 2525x42-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 42mm this Taper Bush offers no costly reboring: full ra... |
|
from £ 36.74* per box |
|
94% |
|
2525x45 Taper Bush - Metric Bore (1 offer) 2525x45-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 45mm this Taper Bush offers versatility and reduced fit... |
|
from £ 39.28* per box |
|
94% |
|
2525x48 Taper Bush - Metric Bore (1 offer) 2525x48-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 48mm this Taper Bush offers no costly reboring: full ra... |
|
from £ 36.58* per box |
|
94% |
|
2525x50 Taper Bush - Metric Bore (1 offer) 2525x50-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 50mm this Taper Bush offers versatility and reduced fit... |
|
from £ 39.43* per box |
|
94% |
|
2525x55 Taper Bush - Metric Bore (1 offer) 2525x55-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 55mm this Taper Bush offers no costly reboring: full ra... |
|
from £ 36.72* per box |
|
94% |
|
2525x60 Taper Bush - Metric Bore (1 offer) 2525x60-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 60mm this Taper Bush offers versatility and reduced fit... |
|
from £ 39.39* per box |
|
94% |
|
2525x7/8 Taper Bush - Imperial Bore (1 offer) 2525x7/8-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 0.875inches this Taper Bush offers no costly reboring:... |
|
from £ 11.10* per box |
|
94% |
|
3020x1.1/16 Taper Bush - Imperial Bore (1 offer) 3020x1.1/16-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 1.0625inches this Taper Bush offers versatility and... |
|
from £ 14.70* per box |
|
94% |
|
3020x1.11/16 Taper Bush - Imperial Bore (1 offer) 3020x1.11/16-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 1.6875inches this Taper Bush offers no costly rebo... |
|
from £ 14.69* per box |
|
94% |
|
3020x1.13/16 Taper Bush - Imperial Bore (1 offer) 3020x1.13/16-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 1.8125inches this Taper Bush offers no costly rebo... |
|
from £ 14.71* per box |
|
|