Bellows  (514 offers of 5,345,061 product items)

The Festos push-in connector has standard size, nominal size 9 mm and assembled in any position. Its using push/pull principle of structure with operating pressure complete temperature range up to ...

The Festos push-in connector has standard size, nominal size 3.5 mm and assembled in any position. Its using push/pull principle of structure with operating pressure complete temperature range up t...

The Festo suction cup has height compensator 14.5 mm and nominal width 8 mm and easily replaceable minimum work piece radius 40 mm. Its vacuum connection is G1/4 which used nitrile rubber material ...

The Festos push-in connector has high flow rate which assembled in any position. Its nominal size is 24.9 using push/pull principle of structure.Container size 1 Ambient temperature -25 to 70 °C

The Festos suction cup is easily interchangeable. It has minimum work piece radius 120 mm and suction cup volume is 14,445 cm3. It has position of connection on top with retention force 162.5N and ...

The Festos push-in T-fitting used in 360° orientable and male thread with external hexagon. It has standard size, nominal size is 2mm which is design in t shape and used sealing ring type of screw....

The Festos t-fitting used with thread and 2 sealing ring which compressed air in accordance with ISO-8573 with using anodised aluminium for hollow bolt. It has M3 thread connection port.Zinc die-ca...

The Festo ESH suction cup holder with height compensator, vacuum connection at side and compensator secured by two hexagonal nuts. The threaded connection vaccum port for suction cup mounting M10.V...

The Festo suction cup ESS-15-SF easily interchangeable. The minimum workpiece radius 35 mm and nominal size 2 mm.Suction cup diameter = 15 mm Suction cup volume = 0.208 cm3 Position of connection =...

The Festo stroke of the bellows cylinder can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup the minimum height must be observed, a...

The Festo suction cup has height compensator 22 mm and nominal width 8 mm and easily replaceable minimum work piece radius 75 mm. Its vacuum connection is G1/4 which used nitrile rubber material fo...

The Festo Suction cup ESS-30-EN easily interchangeable. It has minimum workpiece radius 50 mm and nominal size 3 mm.Suction cup diameter = 30 mm Suction cup volume = 2.12 cm3 Position of connection...

The Festo stroke of the bellows cylinder can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup the minimum height must be observed, a...

The Festo stroke of the bellows cylinder can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup the minimum height must be observed, a...

The Festo ESV-30-SN vacuum suction cup is easily replaceable. It has minimum workpiece radius 110 mm and suction cup diameter 30 mm.Suction cup volume = 0.867 cm3 Position of connection on = top As...