Handheld Mobile Computer Accessories (208 items)

Expand your battery capacity by easily interting the CA-MT2AC-5200-PB battery to the pistol grip handle.

Enhance your efficiency by adding the Snap-On Pistol Grip (use with optional 5200 mAh pistol battery CA-MT2AC-5200-PB)

The cradle cup has an insert that must be removed prior to inserting the Albatross with Rugged Ruber Boot. EU/UK charging adapter (CA-MT2AC-12V2A-XX) is included

Maximize the ruggedness by adding the Omni-directional protection Rubber boot. Can coexist with Hand Strap (which is already included in the box of the Albatross main device)

High performance and long-lasting 4300 mAh Li-ion main battery for the Capture Eagle mobile terminal. Standby: Up to 490 hours WiFi: Up to 470 hours 4G: up Up to 440 hours Continuous use: Over 12 h...

Expand your battery capacity by easily interting the CA-MTAC-PBC battery to the pistol grip handle.

The Charging cradle allows you to charge your Eagle Terminal while in the pistol grip.

Charging cradle fits up to 4 Capture Eagle Terminal main batteries (CA-MTAC-4300-MB).

Designed to charge up to two pistol grip batteries (CA-MTAC-5200-PB).

Enhance ergonomics and efficiency by adding the Pistol Grip to your Eagle Terminal. Optionally add the 5200 mAh pistol grip battery CA-MTAC-5200-PB to the Pistol Grip for 120% increase in power cap...

Single cradle specifically for charging your Eagle Terminal. Can be used both with and without the Rugged Rubber Boot with handstrap.

Can easily be installed on the Capture Eagle Terminal. It can be charged by CRD-C66-RBC cradle without removing the rugged rubber boot.

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

The growing demand for consumer electronic devices for home and leisure poses the challenge of upgrading, improving and enhancing existing devices. In CoreParts you will find a wide range of batter...

Conversion Kit Conversion Kit to convert Joya Touch Basic Handheld to a Pistol Grip - Blue

Handheld Rubber Boot Joya Touch Handheld Rubber Boot (for WEC7 models and A6 models)

Pistol Grip Rubber Boot Joya Touch Pistol Grip Rubber Boot (for WEC7 models and A6 models)

94ACC0159 Top Cover for LTE WWAN USB & Dual Antennas

Skorpio X5 BT Headset. Includes USB Type-1 to Type-C, Cigarette adaptor.

Left hand strap glove replacement palm strap, size large. 10 per pack.

CK62 Hand Strap (5/pk) Hand strap for CK62 device without scan handle, five (5) piece per pack.

Customer-installable scan handle for CK62 device, dockable with Honeywell universal dock (CK62- HB-UVN-0, CK62-CB-UVN-0, CK62-5CB-UVN-0) and basic chargers (EDA61K-HB-X, EDA61K-CB-X).

CK67 standard capacity battery pack, 7000mAh.

Accomodates one device and one battery, power only.

Accomodates one device and one battery, power only, Regional power cord purchased separately.

For all CK67 models

Rugged, customer-installable scan handle for CK67.

CT30 XP healthcare battery pack, 3400mAh, for use with CT30 XP healthcare configurations (last two digits in part number begin with H: CT30P-xxx-xxxxxHx)

CT30 XP healthcare carrying clip. Snaps on top of CT30 XP healthcare terminal of WLAN configuration (CT30P-X0N-30D10HG). Built with disinfectant-ready, healthcare grade plastic. 5pcs are included i...

Snaps on top of CT30 XP terminal of WLAN configuration (CT30P-L0N-XXXXXXX and (CT30P-X0NXXXXXXX). 5pcs are included in the kit.

Kit includes display base, power supply, must order power cord separately. For Charging CT30 XP with protective boot (CT30P-PB-XP) attached, connection with an external display, extending I/O for H...

IH40 bracket for non-booted CT30 XP. Not compatible with protective boot.

IH40 bracket for non-booted CT30 XP. Not compatible with protective boot.

Kit includes quad battery charger, power supply, EU power cord. For recharging up to four CT30 XP batteries.

Kit includes quad battery charger, power supply, UK power cord. For recharging up to four CT30 XP batteries.

Kit includes healthcare quad battery charger and power supply. Must order power cord separately. For recharging up to four CT30 XP batteries.

CT30 XP screen protector, 1 piece per pack. Can be used with stylus.

Manufactured with disinfectant-ready material. Can be cleaned by approved disinfectant agents.

For Ethernet communications and recharging up to four computers (no boots). Kit includes net base, power supply and UK power cord.

For one CT40 HC (no protective boot). Dock, power supply and cables must be ordered separately.

For charging up to 4pcs of CT45/CT40/CT45XP/ CT40XP and 4pcs of CT40 batteries. Kit includes 5 bay universal dock, booted CT40 cup, CT40 battery cup, power adapter and EU power cord.

For charging up to four batteries. Kit includes dock and power supply. Power cord must be ordered separately.

CT45/CT40 self adhesive, tempered glass screen protector, black frame.

For holding the CT40/CT45/CT47 firmly on a vehicle working environment. Compatible with booted or non-booted scan handles.

For charging up to four batteries. Kit includes dock and power supply. Power cord must be ordered separately.

For charging up to four batteries. Kit includes dock, power supply and EU power cord.

Cable with 3-pin plug and 10–30V cigarette lighter adapter for use with Mobile Base.

One (1) standard rechargeable battery, 3.85 V, 8000 mAh.

75 mm x 75 mm (2.95 in x 2.95 in) VESA mount kit. Includes 10 x M3 round screws.

EDA10A four (4) battery packs (EDA10A-BAT). Kit includes: charging base, power supply and power cord for Europe

EDA10A four (4) battery packs (EDA10A-BAT). Kit includes: charging base, power supply and power cord for UK

Shoulder strap kit including D-clips. Adjustable cross-body strap with booted tablet or carrying case.

Hand strap kit for ScanPal EDA50K/EDA51K

EDA52 backwards adapter to work with EDA50-HB-R accessories.

EDA52 Snap on USB cup for standard USB port

Adjustable rotating hand strap for comfort. Set of three.

IH25 bracket EDA51K, kitting. IH25 RFID handle needs to be purchased separately

IH25 bracket for ScanPal EDA52 Terminal without rubber boot.

For booted CT40; allows holding the mobile computer and charging it simultaneously

Adapts VM dock to 851-070-003 DC/DC converter, which is used in the 203-950-002 kit, 30 cm (12 in).

Discover the MOBILIS®-designed data acquisition terminal Clear screen protector; it effectively protects the screen of your Zebra TC21/26 against breakages, scratches, dust, etc. This screen protec...

Discover the MOBILIS®-designed tablet Clear screen protector; it effectively protects the screen of your tablet Zebra TC8000 - TC8300 against breakages, scratches, dust, etc. This screen protector ...

Discover the MOBILIS®-designed Clear screen protector; it effectively protects the screen of your terminal Honeywell CT47 against breakages, scratches, dust, etc. This screen protector is IK06 stan...

Discover the MOBILIS®-designed Clear screen protector; it effectively protects the screen of your terminal Honeywell CT37 - CT37HC against breakages, scratches, dust, etc. This screen protector is ...