Fieldbus Modules (251 items)

The supply module provides the I/O modules with the corresponding supply potential. The maximum current at the supply module is 10A. When configuring the system, it must be ensured that this total ...

The internal system supply module increases the current supply for the internal system by 2A. If the internal current consumption of all modules is higher than 2A, an additional supply module must ...

Field side connection module for multiple tapping of the supply voltage. This eliminates the need for additional terminal blocks.

The supply module provides the I/O modules with the corresponding supply potential. The maximum current at the supply module is 6.3A. When configuring the system, it must be ensured that this total...

Distance Module The separation module visually divides a fieldbus node into sections. Separation module 750-616 has no power jumper contacts. Operation of the adjacent I/O modules requires a supply...

The separation module visually divides a fieldbus node into sections. Separation module 750-616/030-000 has no power jumper contacts.

Distance Module The separation module visually divides a fieldbus node into sections. Separation module 750-621 has power jumper contacts that can supply the power to adjacent bus modules.

Binary Spacer Module Binary spacer modules reserve bit addresses in the process image of a fieldbus node. The operating mode as well as the bit width can be adjusted by DIP switches on the side of ...

Power Supply; 24 V/5 … 15 VDC The I/O module generates 5V, 8V, 10V, 12V and 15V DC output voltages from the 24VDC input voltage. The output voltage is selected by a DIP switch located on the side o...

The WAGO‐I/O-SYSTEM 750 can also be used in shipbuilding applications and onshore/offshore installations (e.g., platforms, loading facilities). This is possible via certification under the standard...

Bus Extension End Module The end module for the internal data bus extension 750-627 is attached to the end of the I/O terminal block like the standard end module 750-600. The block is terminated wi...

Bus Extension Coupler Module The coupler module for the internal data bus extension module 750-628 replaces the fieldbus coupler/controller at an I/O terminal block. It is also the mating piece for...

This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it di...

SSI transmitter interface; Fail-safe 2 channel analog input; 125 kHz; Binary code This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a cl...

This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it di...