Development Board Accessories (34 items)

This plexiglass case can be used to secure your Raspberry Pi 4® to the back of a TV or other monitor with VESA mount (10 x 10 cm). The case consists out of two transparent bottom and top plates and...

A rotary encoder is an input device that indicates the rotating direction and how much the knob has been rotated. A rotary encoder is useful for for stepper and servo motor control.

This product is a replacement of: VMA506

The 1 A LITHIUM BATTERY CHARGING BOARD (2 pcs) is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. This product is a replacement of: VMA321,MM104

The Line Tracking Sensor based on TCRT5000 is an type of infrared reflectance sensor, and is commonly used in line following robots, it is mounted at the bottom of the robot chassis. The line track...

This high sensitivity sound detection module detects sounds between 48 and 66 dB and has an analog as well as a digital output. The AO or analog output creates a real-time output voltage signal of ...

PIR sensors allow to sense motion, almost always used to detect whether a human has moved in or out of the sensor’s range. This product is a replacement of: VMA314

A small and versatile motor and driver set. This 5 VDC stepper motor controlled by the ULN2003 driver can be used with any Arduino® or compatible boards via jumper leads. Four-phase LED indicates t...

This package includes a water level sensor and a soil moisture sensor. If the boards have water covering the sensor parts, an analogue value will be available at the “SIG” connection. The water lev...

The DS1302 trickle-charge timekeeping chip contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/c...

The WPSE347 is a LM393 speed sensor module, widely used in motor speed detection, pulse count, position control, etc. The sensor is very easy to operate: To measure the speed of a motor, make sure ...

The project holder allows you to attach the Arduino® UNO and the included breadboard together. It contains two grooves (one groove size is 88 x 60 mm), which is the just right size to fit a 400 hol...

This Joystick module provides X and Y axis control for your microcontroller projects. It also includes a “push down” microswitch. This product is a replacement of: VMA315

This shield will prove useful for data logging with your Arduino. Can be easily assembled and customised for any data logging project. The SD card interface works with FAT16 and FAT32 formatted car...