Lathe Accessories (30 items)

Used to clamp concentric pieces such as round pieces. - Reversible jaws clamp from 1/16" to 1-3/8" (1.5 to 32mm) inside and 1/2" to 2-19/32" (12 to 65mm) outside. - The chuck has a M16 x 1 thread f...

Used to clamp asymmetrical pieces such as rectangles. - Reversible jaws clamp from 0 to 1-3/8" (0 to 35mm) inside and 35/64" to 2-5/8" (14 to 67mm) outside. - The chuck has a M16 x 1 thread for fit...

Highest quality set with the most frequently used chisels: tube chisel, flat chisel, pointed chisel, anvil chisel and finishing chisel. Neatly packed in a wooden box. - For use with the Micro Woodt...

Three holders (90mm long): - for roughing out; - for longitudinal work; - for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additi...

Three holders (90mm long): - for roughing out; - for longitudinal work; - for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additi...

Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Neatly packed in a wooden box.

For accurate use on round components. One hardened collet each hardened collet 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 - 10 - 12 and 14mm are included. Concentric accuracy better than 0.002mm, much bette...

Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.

Including two holders. Provides quick tool changes with easy height adjustment.

Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face plate with 30mm bore as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin ...

Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.

The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm.

The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm.

Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm.

Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.