 | | | | |
Picture | | | | Order |
|
|
Proxxon 24 010 (1 offer) Especially for boring. Also required if the tailstock cannot be used to "counter". Up to Ø 40mm. |
|
from £ 60.69*
per piece |
|
|
Proxxon 24 014 (1 offer) For highest accuracy with high rotational precision. This includes: 1 face plate, 2 fixed centres (MK 2 and MK 1/short) and 1 drive dog. Packed in a wooden box. |
|
from £ 84.13*
per piece |
|
|
Proxxon 24 020 (1 offer) Capacity to 10mm, with key and MK1, for tailstock. |
|
from £ 20.14*
per piece |
|
|
Proxxon 24 026 (1 offer) For quick tool change and easy height adjustment. Includes 2 tool holder elements. |
|
from £ 85.73*
per piece |
|
|
Proxxon 24 036 (1 offer) For clamping angular and asymmetrically shaped work pieces. Capacity up to 80mm. Chuck Ø 75mm. |
|
from £ 140.27*
per piece |
|
|
Proxxon 24 038 (1 offer) For high precision machining of round parts. The collet set is mounted instead of the lathe chuck. With 8 collets (2 - 2.5 - 3 - 4 - 5 - 6 - 8 and 10mm). Packed in a wooden box. |
|
from £ 147.55*
per piece |
|
|
Proxxon 24 082 (2 offers) Sizes: M 3 - 4 - 5 - 6 - 8 - 10. The straight shaft fits the holder Ø 10mm when mounted in the tailstock of the PD 230/E. The holder is held by hand while cutting the threads. Comes in a wooden box. |
|
from £ 67.75*
per piece |
|
|
Proxxon 24 140 (1 offer) Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equiv... |
|
from £ 96.21*
per piece |
|
|
|
|
from £ 59.66*
per piece |
|
|
Proxxon 24 257 Lathe step clamp (2 offers) For work pieces up to 35mm thickness. Two each step blocks and clamps. With matching nuts and screws for fixation in T-slots of the MICROMOT standard (12 x 6 x 5mm). Supplied in wooden box with sli... |
|
from £ 32.95*
per 2 pieces |
|
|
Proxxon 24 262 Lathe precision vice (2 offers) Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 50 x 30 x 30mm. The solid clamp and knurled knob... |
|
from £ 36.81*
per 2 pieces |
|
|
Proxxon 24 266 (1 offer) Ground in pairs For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.002mm. 2 each of 8 x 10, 15, 20, 25, 30, ... |
|
from £ 95.08*
per piece |
|
|
Proxxon 24 402 (2 offers) Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 8... |
|
from £ 157.58*
per piece |
|
|
Proxxon 24 404 (2 offers) Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm. |
|
from £ 65.49*
per piece |
|
|
Proxxon 24 406 (2 offers) Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm. |
|
from £ 52.33*
per piece |
|
|
