Router Bits (37 items)

Pointed chisel with 28 mm hex shank 520 mm; Pointed chisel

Flat chisel, 28-mm hex shank 520 x 36 mm; Flat chisel

Gouging chisel SDS-max 300 x 32 mm; Gouging chisel

Earth rod driver, 28-mm hex shank 300 mm; Earth rod driver; for hammering in rods and rings up to 1" (25.4 mm) head diameter.

1 SDS-plus pointed chisel 250 mm 1 SDS-plus spade chisel 40 x 250 mm 1 SDS-plus flat chisel 20 x 250 mm

Asphalt cutter SDS-max 400 x 90 mm; Asphalt cutter

Earth rod driver SDS-max 260 x 16,5 mm; Earth rod driver

Pointed chisel RTec Speed, SDS-max 400 mm; RTec Speed pointed chisel, self-sharpening with 30% higher material removal rate

Flat chisel SDS-plus 250 x 20 mm; Flat chisel, Long Life with 30% longer lifetime and 15% higher material removal rate

Pointed chisel SDS-plus 250 mm; Pointed chisel, Long Life with 30% longer lifetime and 15% higher material removal rate

Spade chisel SDS-max 350 x 50 mm; Spade chisel, self-sharpening, Long Life with 30% higher material removal rate

Pointed chisel with 28 mm hex shank 400 mm; Pointed chisel, self-sharpening

Flat chisel, 28-mm hex shank 400 x 36 mm; Flat chisel

Pointed chisel with 30 mm hex shank 400 mm; Pointed chisel, self-sharpening

Flat chisel, 30-mm hex shank 400 x 35 mm; Flat chisel

Spade chisel, 30-mm hex shank 450 x 75 mm; Spade chisel

Asphalt cutter, 28-mm hex shank 500 x 125 mm; Asphalt cutter

Flat chisel SDS-max 600 x 25 mm; Flat chisel

Pointed chisel SDS-max 600 mm; Pointed chisel

Spade chisel SDS-max 300 x 80 mm; Spade chisel

Spade chisel SDS-max 350 x 115 mm; Spade chisel

Gouging chisel SDS-plus 250 x 22 mm; Hollow gouging chisel

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.

Collets offer the most precise way to hold an accessory in a multitool. The collet kit 4485 is an assortment of the different available collets (0.8 / 1.6 / 2.4 / 3.2 mm) including a collet nut.

Piloted Beading Bit. A decorative bit for detailed edges.

Piloted Corner Rounding Bit. Rounding over edges and corners.

V-Groove Bit. For sign word and lettering.

Straight Bits. General purpose routing or grooving.

Straight Bits. General purpose routing or grooving.

Keyhole router bit. For routing, mounting slots in picture frames or anything that needs to be hung.

Made from tungsten carbide steel, with 1/8" (3.2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. This 10 piece profile set includes:...

Slotting bit, tungsten carbide tipped, 2 cutters, precision ground cutting edges, for cutting narrow slots in narrow edges eg for tongue and groove joinery, jointing biscuits, or door seals, for ha...