Cable Trunking System Accessories (80 items)

Used to protect the insulation against damage and keep heat loss to a minimum.

Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces. Used to mount, brace, support or connect structural loads in bu...

Saves installation time by allowing conduit or pip to be laid in place after the hanger is mounted For use with conduit and pipe

Assembly includes steel clamp with bolt/locknut and cushion. To secure pipes, tubes and hoses for fluid conductors.

A Liquidtight Fitting to Secure Flexible Cord or Power Cable to a Box or Enclosure and Provide Strain Relief.

Assembly includes steel clamp with bolt/locknut and cushion. To secure pipes, tubes and hoses for fluid conductors.

Splices large conductors required for commercial service, use as low cost reducing sleeve. All sizes can be installed with popular mechanical and hydraulic tools. Center stop assures proper conduct...

Designed for quick, easy, tool-less installation. After installing, remove excess tail with a simple bend Bend again and twist motion.

Uncoated For Temperatures up to 300 Degrees Celsius (572 F) for Indoor and Outdoor Applications, Suitable for High Temperature Environments

Extruded Grommeting, Natural Nylon 6.6 for Temperatures up to 85 Degrees Celsius (185 F), Height of 5.08mm (0.20 Inches), Width of 4.32mm (0.17 Inches), Thickness 1.14mm (0.045 Inches), Width Maxim...

Extruded Grommeting, Natural Nylon 6.6 for Temperatures up to 85 Degrees Celsius (185 F), Height of 5.58mm (0.220 Inches), Width of 5.21mm (0.205 Inches), Thickness 1.27mm (0.05 Inches), Width Maxi...

Extruded Grommeting, Natural Nylon 6.6 for Temperatures up to 85 Degrees Celsius (185 F), Height of 7.11mm (0.28 Inches), Width of 9.40mm (0.37 Inches), Thickness 1.27mm (0.05 Inches), Width Maximu...

Made of flexible PVC compound - Easy to apply - Protects cables from chafing on bulkheads PVC Beading strip is used to protect cables routed through sharp-edged cutout sections. It can also be used...

This Cable Wire Duct is made to hide cables in home and office installations.

This Cable Wire Duct is made to hide cables in home and office installations.

1U cable management panel, 5x PVC cable rings 31x85 mm, rotatable, replaceable, grey

Straight connector for straight connection of cable trays and fittings with a side height of 60 mm.

Allows cable tie entry from all four sides - Available in multiple sizes to match application load requirements - Provides 2-up for fast and easy liner removal to speed Rubber Adhesive - General pu...

4-Way adhesive backed cable tie mount, high temp, .75"x.75" (19.1mm x 19.1mm), white, standard package.

Duct cover with protective film, 1 W x 6' length, PVC, white.

Mini-Com® 1-port blank module, reserves space for future use.

Round hole design retains and supports wires at variable heights and positions to enhance wire management. Smooth round edges to prevent wire abrasion. Base scoreline for easy removal for T-junctio...