Interface Cards/Adapters (105 items)

USB 2.0 to 4S Serial RS-232 ports, screw lock, metal housing, incl. power supply and cable EX-1552V (FTDI-Chip-Set).

Interface: RS-232 V.24, RS-422 and RS-485 - FIFO Buffer: 16C550 with 16Byte - I/O addresses and Interrupt: Set from the operating system - Data Bits: 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, eve...

Interface: RS-232 V.24, RS-422 and RS-485 - ESD 15KV Surge Protection und 2.5KV Optical Isolation - FIFO Buffer: 16C550 with 16Byte - I/O addresses and Interrupt: Set from the operating system - Da...

The EX-3465 1-to-4 SATA II Switch is designed to provide a high performance link between a single SATA II host port and 4 SATA devices ports. 3.5 or 5.25-inch Bay Form Factor, Easy to Fit in Normal...

The EX-3517R is a powerful SATA3 RAID 0, 1 and 5 controller to connect SATA 2 / 3 and SSD hard drives via the new PCI-Express Bus. It supports RAID0 (stripping), RAID1 (mirroring) and RAID5 (stripp...

EIDE PCI-Express Controller for DVD and CD-ROM drives.

The best solution that utilizes IPC Main Board M.2 NGFF socket to use the wild range and high capacity of SATA3, SATA2 and SATA 1 device, like Hard Drive, SSD and Optical Drives.

The EX-3605 converter can used for a replacement of a 2.5-inch hard drive or SSD. For connect the EX-3605 need a SATA connector from the Motherboard or from a SATA controller. You can use following...

The EX-3608 converter can used for a replacement of a 3.5-inch hard drive or SSD. For connect the EX-3608 need a SATA 3 connector from the Motherboard or from a SATA 3 controller. You can use two M...

With the EX-3650 controller you can add in your computer system a M.2 NGFF slot. You can use following M.2 NGFF module: 2280, 2260 and 2242. The EX-3650 need a PCI-Express x4 slot.

With the EX-3655 controller you can add in your computer system two M.2 NGFF slot. You can use following M.2 NGFF module: 22110, 2280, 2260 and 2242. The module with B-key and also B+M-key will be ...

With the EX-3660 controller you can expand in your computer system two SATA M.2 NGFF module as well as one PCIe M.2 NGFF module. One of the M.2 NGGF slot are on the back site from the EX-3660. You ...

The EX-3682 converter can used for a replacement of a 2.5-inch hard drive or SSD. For con-nect the EX-3682 need a SATA 3 connector from the Motherboard or from a SATA 3 controller. You can use the ...

The EX-3683 converter can used for a replacement of a 2.5-inch hard drive or SSD. For connect the EX-3683 need a SATA 3connector from the Motherboard or from a SATA 3 controller. You can use the mS...