SATA Cables (355 items)

Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

Connect internal peripheral equipment to your mainbord.

Roundcable with sheat for better airflow and spac esaving in the PC casing. For connection of the internal IDE-controller with a U-DMA device. Downwardly compatible with U-DMA 100/66/33 and Standar...

SAS cable, Mini SAS SFF8087 (36pin) to 4x SATA, 1:1 assignment (= straight through = reverse breakout, OCR) , for connecting drives or backplanes to a host-controller with 4 SATA connectors. Compat...

This Slimline SATA cable is to connect a CD/DVD drive with Slimline SATA connector to computer

SATA-III Data cable 1 x SATA-III, straight to 1 x SATA-III 90° angled, 0,50m

SATA-II Data cable 1 x SATA-III straight - 1 x SATA-III straight, 0,50m

This SATA - SFF-8087 cross-over cable is for connection between backplanes with SFF 8087 connector and SATA controllers.

ThinkStation Front eSATA Cable is fully compatible with ThinkStation Systems (P500, P700, P900). This cable is for the front eSATA interface on the front panel. This cable should be installed in Th...

The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs ...

SATA 1.0a and SATA II compatible - Straight to right angle latch type SATA plugs which lock into place when used with compatible latching controller or device ports - Can also be used with standard...

SATA 1.0a and SATA II compatible Features latch type, low profile SATA plugs which lock into place when used with compatible latching controller or device ports Can also be used with standard non-l...