Mounting Kits (5,332 items)

Coding profile, is inserted into the slot on the plug or inverted header, red insulating material

Coding profile, for plugging into the coding ribs of the plug at a later date, insulating material, color: Red

Fixing screw; for 209-120 mounting carrier

Screwable mounts for fixing cable sideways - Ideal for securing large, heavier bundles - Suitable for cable ties up to 4.6 mm wide

Screwable mounts for fixing cable sideways - Ideal for securing large, heavier bundles - Suitable for cable ties up to 4.6 mm wide

Cable binder base, for cable binders up to 4 mm wide, self-adhesive (rubber) and screwable, 4 mm fixing hole, 4-sided cable binder feed-through

Pitch spacer, 2.5 mm wide

Cable tie mount - Screw applied, #8 Screw (M4), Bulk package

Marking sleeve; for wire diameter 1.6 - 3.2 mm or 0.25 - 1.5 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 2.2 - 4.5 mm or 0.5 - 4 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

3M™ Bumpon™ Protective Product SJ5007 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The flat top shape provides increased load bearing capacity and better wear re...

Low profile cable tie mount, #2 screw, natural, bulk package.

SKINDICHT® BLK / BLK-GL, blind plug with PG connection thread, for closing pre-threaded holes

Cable binder base, for cable binders up to 6 mm wide, self-adhesive (rubber) and screwable, 4.8 mm fixing hole, 4-sided cable binder feed-through

Cable binder base, for cable binders up to 6 mm wide, self-adhesive (rubber) and screwable, 4.8 mm fixing hole, 4-sided cable binder feed-through

Marking sleeve; for wire diameter 3.7 - 5.9 mm or 2.5 - 6 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Pitch spacer, raises the pitch by 2.54 mm, interlocks with terminal block of the same shape, color: green

Marking sleeve; for wire diameter 1.6 - 3.2 mm or 0.25 - 1.5 mm; 23 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 2.2 - 4.5 mm or 0.5 - 4 mm; 23 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 3.7 - 5.9 mm or 2.5 - 6 mm; 23 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

DIN rail housing, Lower housing part with base latch, flat design, width: 22.6 mm, height: 75 mm, depth: 30.3 mm, color: light gray (7035)

DIN rail housing, Upper part, One-way connection opening, with vents, width: 45.1 mm, height: 74.65 mm, depth: 36.95 mm, color: light gray (7035)

DIN rail housing, Upper part, Without connection opening, with vents, width: 45.1 mm, height: 74.65 mm, depth: 36.95 mm, color: black (9005)

Insertion profile, color: silver

DIN rail housing, Upper part, One-way connection opening, with vents, width: 45.1 mm, height: 74.65 mm, depth: 36.95 mm, color: black (9005)

DIN rail housing, Upper part, Without connection opening, with vents, width: 45.1 mm, height: 74.65 mm, depth: 36.95 mm, color: light gray (7035)

Flange screw for PC 35... connectors

DIN rail housing, Lower housing part with base latch, flat design, width: 22.6 mm, height: 75 mm, depth: 30.3 mm, color: black (9005)

Amphenol AT11-026-0205

DIN rail housing, Upper part, without connection opening, width: 35.1 mm, height: 75 mm, depth: 36.95 mm, color: light gray (7035)

Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green

Double marker carrier; for center I/O marking of the module; suitable for WSB and WMB marking

Protective Product SJ5744 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The cylindrical - flat top provides excellent load bearing and anti-skid performance. - Al...

Twist nipple M_ x 1.5 mm with open sealing membrane, polyethylene, grey

Marking sleeve; for wire diameter 5.5 - 10 mm or 10 - 25 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT) with a width of 5.2 mm

This range of one piece cable ties have a built in mounting hole and once fastened around the cables the bundle can be simply secured to the panel with a screw or bolt. The tie is fitted to the pan...

Lock-out; prevents reclosing of slide link; Snap-in type; for 2003 series