Mounting Kits (343 items)

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver

Panel mounting flange for screw locking, set comprising 2 panel mounting flanges with 4 self-tapping screws (M4, Torx®) and 4 fan-type washers

Panel mounting frame, with PE, for VARIOCON supporting base elements, type 1, number of insert modules 2

Panel mounting frame, with PE, for VARIOCON supporting base elements, type 4, number of insert modules 5

Panel mounting frame, IP67, for Freenet system, for round panel cutout, with grommet, without mounting screws, color: gray.

Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green

Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green

Flange screw for PC 35... connectors

Pitch spacer, number of positions: 1, pitch: 0 mm, color: green

Pitch spacer, number of positions: 1, pitch: 7.5 mm, color: green

Coding profile, for plugging into the coding ribs of the plug at a later date, insulating material, color: Red

Pitch spacer, 2.5 mm wide

Coding profile, is inserted into the slot on the plug or inverted header, red insulating material

D-SUB adapter plate, for two D-SUB connectors, no. of positions 9, housing series HC-B 6...

D-SUB adapter plate, for one D-SUB connector, no. of positions 15, housing series HC-B 6...

D-SUB adapter plate, for two D-SUB connectors, no. of positions 15, housing series HC-B 6...

D-SUB adapter plate, for one D-SUB connector, no. of positions 25, housing series HC-B 10...

D-SUB adapter plate, for two D-SUB connectors, no. of positions 25, housing series HC-B 10...

D-SUB adapter plate, for one D-SUB connector, no. of positions 37, housing series HC-B 16...

D-SUB adapter plate, for two D-SUB connectors, no. of positions 37, housing series HC-B 16...

Pitch spacer, raises the pitch by 2.54 mm, interlocks with terminal block of the same shape, color: green

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 2, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 4, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 6, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 8, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 12, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 14, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, without PE, for contact insert modules, type 4, number of insert modules 5

EMC shield adapter, for EMC connector, type 1, number of insert modules 2

EMC shield adapter, for EMC connector, type 3, number of insert modules 4

EMC shield adapter, for EMC connector, type 4, number of insert modules 5

Half screw connection Pg16, made of metal, consisting of rubber seal with one hole and one pressure screw, for type 1 housings, cable [mm] 5 - 8

Half screw connection Pg16, made of metal, consisting of rubber seal with one hole and one pressure screw, for type 1 housings, cable [mm] 6.5 - 9.5

Half screw connection Pg16, made of metal, consisting of rubber seal with one hole and one pressure screw, for type 1 housings, cable [mm] 9 - 13

Coding profile, is inserted into the groove in the header, red insulating material

Lateral element (left) with mounting foot for DIN rails for UM-PRO profiles with a PCB width of 108 mm

Lateral element (left) with mounting foot for DIN rails for UM-PRO profiles with a PCB width of 122 mm

DIN rail housing, Upper part, without connection opening, width: 35.1 mm, height: 75 mm, depth: 36.95 mm, color: light gray (7035)

DIN rail housing, Upper part, without connection opening, width: 52.6 mm, height: 75 mm, depth: 36.95 mm, color: light gray (7035)

DIN rail housing, Upper part, without connection opening, width: 70.1 mm, height: 75 mm, depth: 36.95 mm, color: light gray (7035)

DIN rail housing, Upper part, without connection opening, width: 70.1 mm, height: 75 mm, depth: 36.95 mm, color: black (9005)

DIN rail housing, Lower housing part with base latch, flat design, width: 45.1 mm, height: 75 mm, depth: 30.3 mm, color: black (9005)

DIN rail housing, Lower housing part with base latch, flat design, width: 90.1 mm, height: 75 mm, depth: 30.3 mm, color: light gray (7035)

DIN rail housing, Lower housing part with base latch, flat design, width: 90.1 mm, height: 75 mm, depth: 30.3 mm, color: black (9005)

DIN rail housing, Lower housing part with base latch, flat design, width: 22.6 mm, height: 75 mm, depth: 30.3 mm, color: light gray (7035)