Mounting Kits (417 items)

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, in acc. with EN 60715: 2001, material: Aluminum, uncoated, length: 2000 mm, color: silver

Panel mounting flange for screw locking, set comprising 2 panel mounting flanges with 4 self-tapping screws (M4, Torx®) and 4 fan-type washers

Panel mounting frame, with PE, for VARIOCON supporting base elements, type 4, number of insert modules 5

Panel mounting frame, IP67, for Freenet system, for round panel cutout, with grommet, without mounting screws, color: gray.

Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green

Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green

Pitch spacer, number of positions: 1, pitch: 0 mm, color: green

Pitch spacer, number of positions: 1, pitch: 7.5 mm, color: green

Coding profile, for plugging into the coding ribs of the plug at a later date, insulating material, color: Red

Pitch spacer, 2.5 mm wide

Coding profile, is inserted into the slot on the plug or inverted header, red insulating material

D-SUB adapter plate, for two D-SUB connectors, no. of positions 9, housing series HC-B 6...

D-SUB adapter plate, for one D-SUB connector, no. of positions 15, housing series HC-B 6...

D-SUB adapter plate, for two D-SUB connectors, no. of positions 15, housing series HC-B 6...

D-SUB adapter plate, for one D-SUB connector, no. of positions 25, housing series HC-B 10...

D-SUB adapter plate, for two D-SUB connectors, no. of positions 25, housing series HC-B 10...

D-SUB adapter plate, for one D-SUB connector, no. of positions 37, housing series HC-B 16...

D-SUB adapter plate, for two D-SUB connectors, no. of positions 37, housing series HC-B 16...

Pitch spacer, raises the pitch by 2.54 mm, interlocks with terminal block of the same shape, color: green

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 2, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 4, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 6, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 8, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 12, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, nominal cross section: 2.5 mm², number of positions: 14, pitch: 5.08 mm, color: green, This assembly frame can only be used in combination with IC 2,5/...-STGF-5,08

Panel mounting frame, without PE, for contact insert modules, type 4, number of insert modules 5

EMC shield adapter, for EMC connector, type 1, number of insert modules 2

EMC shield adapter, for EMC connector, type 3, number of insert modules 4

EMC shield adapter, for EMC connector, type 4, number of insert modules 5

Half screw connection Pg16, made of metal, consisting of rubber seal with one hole and one pressure screw, for type 1 housings, cable [mm] 5 - 8

Half screw connection Pg16, made of metal, consisting of rubber seal with one hole and one pressure screw, for type 1 housings, cable [mm] 6.5 - 9.5

Half screw connection Pg16, made of metal, consisting of rubber seal with one hole and one pressure screw, for type 1 housings, cable [mm] 9 - 13

Coding profile, is inserted into the groove in the header, red insulating material

Lateral element (right) with mounting foot for DIN rails for profiles for PCB width 72 mm

Lateral element (left) with mounting foot for DIN rails for UM-PRO profiles with a PCB width of 108 mm

Mounting foot for 108 mm UM-PRO profiles for mounting on DIN rails

Lateral element (left) with mounting foot for DIN rails for UM-PRO profiles with a PCB width of 122 mm

Mounting foot for 122 mm UM-PRO profiles for mounting on DIN rails

PE contact for UM-PRO panel mounting base for connecting the PCB to the DIN rail at level 1

PE contact for UM-PRO panel mounting base for connecting the PCB to the DIN rail at level 2

PE contact for UM-PRO panel mounting base for connecting the PCB to the DIN rail at level 3

Locking element for locking the PCB onto UM-PRO housing at level 2

Locking element for locking the PCB onto UM-PRO housing at level 3

Fuse element for mounting UM-PRO panel mounting bases directly onto the mounting plate

Press-drawn section housings, Side element for U-shaped profile cover, width: 9.95 mm, length: 95 mm, color: black (9005)