 | | | | |
Picture | | | | Order |
|
|
End Mill C2471/2 (1 offer) Short series end mill with 4 flutes, diameter 1/2" with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 76.864*
per piece |
|
|
End Mill C2471/4 (1 offer) Short series end mill with 4 flutes, diameter 1/4" with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 52.114*
per piece |
|
|
End Mill C2471/8 (1 offer) Short series end mill with 4 flutes, diameter 1/8" with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 35.957*
per piece |
|
|
End Mill C24710.0 (1 offer) Short series end mill with 4 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 31.5mm reach with neck relief, according to DIN 844 K standard with a 10mm Weldon shank, powder m... |
|
£ 48.798*
per piece |
|
|
End Mill C24712.0 (1 offer) Short series end mill with 4 flutes, diameter 12mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 57.599*
per piece |
|
|
End Mill C24713.0 (1 offer) Short series end mill with 4 flutes, diameter 13mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 76.864*
per piece |
|
|
End Mill C24714.0 (1 offer) Short series end mill with 4 flutes, diameter 14mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 72.063*
per piece |
|
|
End Mill C24715.0 (1 offer) Short series end mill with 4 flutes, diameter 15mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 85.576*
per piece |
|
|
End Mill C24716.0 (1 offer) Short series end mill with 4 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
£ 86.457*
per piece |
|
|
End Mill C24718.0 (1 offer) Short series end mill with 4 flutes, diameter 18mm with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
£ 97.842*
per piece |
|
|
End Mill C2472.0 (1 offer) Short series end mill with 4 flutes, diameter 2mm with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 37.33*
per piece |
|
|
End Mill C2472.5 (1 offer) Short series end mill with 4 flutes, diameter 2.5mm with 8mm length of cut and 52mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 38.323*
per piece |
|
|
End Mill C24720.0 (1 offer) Short series end mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 53.5mm reach with neck relief, according to DIN 844 K standard with a 20mm Weldon shank, powder ... |
|
£ 115.227*
per piece |
|
|
End Mill C24725.0 (1 offer) Short series end mill with 5 flutes, diameter 25mm with 45mm length of cut, 121mm overall length and 64.5mm reach with neck relief, according to DIN 844 K standard with a 25mm Weldon shank, powder ... |
|
£ 191.734*
per piece |
|
|
End Mill C2473.0 (1 offer) Short series end mill with 4 flutes, diameter 3mm with 8mm length of cut and 52mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 35.254*
per piece |
|
|
End Mill C2473.5 (1 offer) Short series end mill with 4 flutes, diameter 3.5mm with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 35.957*
per piece |
|
|
End Mill C2473/16 (1 offer) Short series end mill with 4 flutes, diameter 3/16" with 13mm length of cut and 57mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 38.452*
per piece |
|
|
End Mill C2474.0 (1 offer) Short series end mill with 4 flutes, diameter 4mm with 11mm length of cut and 55mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 35.373*
per piece |
|
|
End Mill C2474.5 (1 offer) Short series end mill with 4 flutes, diameter 4.5mm with 11mm length of cut and 55mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 38.452*
per piece |
|
|
End Mill C2475.0 (1 offer) Short series end mill with 4 flutes, diameter 5mm with 13mm length of cut and 57mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 34.858*
per piece |
|
|
End Mill C2475.5 (1 offer) Short series end mill with 4 flutes, diameter 5.5mm with 13mm length of cut and 57mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 42.442*
per piece |
|
|
End Mill C2475/8 (1 offer) Short series end mill with 4 flutes, diameter 5/8" with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
£ 86.457*
per piece |
|
|
End Mill C2476.0 (1 offer) Short series end mill with 4 flutes, diameter 6mm with 13mm length of cut and 57mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 35.254*
per piece |
|
|
End Mill C2476.5 (1 offer) Short series end mill with 4 flutes, diameter 6.5mm with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright... |
|
£ 52.114*
per piece |
|
|
End Mill C2477.0 (1 offer) Short series end mill with 4 flutes, diameter 7mm with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 49.619*
per piece |
|
|
End Mill C2478.0 (1 offer) Short series end mill with 4 flutes, diameter 8mm with 19mm length of cut and 69mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 44.541*
per piece |
|
|
End Mill C2731/2 (1 offer) Long series end mill with 4 flutes, diameter 1/2" with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
£ 95.466*
per piece |
|
|
End Mill C2731/4 (1 offer) Long series end mill with 4 flutes, diameter 1/4" with 30mm length of cut and 80mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 61.529*
per piece |
|
|
End Mill C27310.0 (1 offer) Long series end mill with 4 flutes, diameter 10mm with 45mm length of cut, 95mm overall length and 54.5mm reach with neck relief, according to DIN 844 L standard with a 10mm Weldon shank, powder me... |
|
£ 60.49*
per piece |
|
|
End Mill C27311.0 (1 offer) Long series end mill with 4 flutes, diameter 11mm with 45mm length of cut and 102mm overall length, according to DIN 844 L standard with a 12mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 79.30*
per piece |
|
|
End Mill C27312.0 (1 offer) Long series end mill with 4 flutes, diameter 12mm with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
£ 71.419*
per piece |
|
|
End Mill C27314.0 (1 offer) Long series end mill with 4 flutes, diameter 14mm with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
£ 89.477*
per piece |
|
|
End Mill C27315.0 (1 offer) Long series end mill with 4 flutes, diameter 15mm with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
£ 105.544*
per piece |
|
|
End Mill C27316.0 (1 offer) Long series end mill with 4 flutes, diameter 16mm with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
£ 107.524*
per piece |
|
|
End Mill C27318.0 (1 offer) Long series end mill with 4 flutes, diameter 18mm with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
£ 122.018*
per piece |
|
|
End Mill C27325.0 (1 offer) Long series end mill with 5 flutes, diameter 25mm with 90mm length of cut, 166mm overall length and 109.5mm reach with neck relief, according to DIN 844 L standard with a 25mm Weldon shank, powder ... |
|
from £ 27.78*
per piece |
|
|
End Mill C2733/8 (1 offer) Long series end mill with 4 flutes, diameter 3/8" with 45mm length of cut, 95mm overall length and 54.5mm reach with neck relief, according to DIN 844 L standard with a 10mm Weldon shank, powder me... |
|
£ 67.192*
per piece |
|
|
End Mill C2734.0 (1 offer) Long series end mill with 4 flutes, diameter 4mm with 19mm length of cut and 63mm overall length, according to DIN 844 L standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 43.778*
per piece |
|
|
End Mill C2735.0 (1 offer) Long series end mill with 4 flutes, diameter 5mm with 24mm length of cut and 68mm overall length, according to DIN 844 L standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 43.382*
per piece |
|
|
End Mill C2735/8 (1 offer) Long series end mill with 4 flutes, diameter 5/8" with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
£ 107.524*
per piece |
|
|
End Mill C2736.0 (1 offer) Long series end mill with 4 flutes, diameter 6mm with 24mm length of cut and 68mm overall length, according to DIN 844 L standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 43.63*
per piece |
|
|
End Mill C2737.0 (1 offer) Long series end mill with 4 flutes, diameter 7mm with 30mm length of cut and 80mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 61.529*
per piece |
|
|
End Mill C2738.0 (1 offer) Long series end mill with 4 flutes, diameter 8mm with 38mm length of cut and 88mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 55.282*
per piece |
|
|
End Mill C2739.0 (1 offer) Long series end mill with 4 flutes, diameter 9mm with 38mm length of cut and 88mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 67.192*
per piece |
|
|
End Mill S7101.0 (1 offer) Short series end mill with 2 flutes, diameter 1mm with 3mm length of cut and 40mm overall length, according to DORMER standard with a 3mm plain shank, solid carbide with AlCrN coating, 40° helix an... |
|
£ 42.48*
per piece |
|
|
End Mill S7101.5 (1 offer) Short series end mill with 2 flutes, diameter 1.5mm with 4.5mm length of cut and 40mm overall length, according to DORMER standard with a 3mm plain shank, solid carbide with AlCrN coating, 40° heli... |
|
£ 42.48*
per piece |
|
|
End Mill S90210.0 (1 offer) Regular length end mill with 2 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 0.18mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid ... |
|
£ 52.302*
per piece |
|
|
End Mill S90212.0 (1 offer) Regular length end mill with 2 flutes, diameter 12mm with 25mm length of cut, 73mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 12mm plain shank, solid c... |
|
£ 74.359*
per piece |
|
|
End Mill S90214.0 (1 offer) Regular length end mill with 2 flutes, diameter 14mm with 30mm length of cut, 83mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 14mm plain shank, solid c... |
|
£ 93.585*
per piece |
|
|
End Mill S90216.0 (1 offer) Regular length end mill with 2 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 16mm plain shank, solid c... |
|
£ 122.968*
per piece |
|
|
End Mill S9022.0 (1 offer) Regular length end mill with 2 flutes, diameter 2mm with 6mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid car... |
|
£ 22.592*
per piece |
|
|
End Mill S9022.5 (1 offer) Regular length end mill with 2 flutes, diameter 2.5mm with 9mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid c... |
|
£ 27.13*
per piece |
|
|
End Mill S9023.0 (1 offer) Regular length end mill with 2 flutes, diameter 3mm with 12mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid ca... |
|
£ 20.701*
per piece |
|
|
End Mill S9024.0 (1 offer) Regular length end mill with 2 flutes, diameter 4mm with 14mm length of cut, 50mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 4mm plain shank, solid ca... |
|
£ 23.632*
per piece |
|
|
End Mill S9025.0 (1 offer) Regular length end mill with 2 flutes, diameter 5mm with 16mm length of cut, 50mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 5mm plain shank, solid ca... |
|
£ 25.681*
per piece |
|
|
End Mill S9026.0 (1 offer) Regular length end mill with 2 flutes, diameter 6mm with 19mm length of cut, 57mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 6mm plain shank, solid ca... |
|
£ 27.81*
per piece |
|
|
End Mill S9027.0 (1 offer) Regular length end mill with 2 flutes, diameter 7mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
£ 39.808*
per piece |
|
|
End Mill S9028.0 (1 offer) Regular length end mill with 2 flutes, diameter 8mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
£ 37.739*
per piece |
|
|
End Mill S9029.0 (1 offer) Regular length end mill with 2 flutes, diameter 9mm with 21mm length of cut, 72mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid c... |
|
£ 46.768*
per piece |
|
|
End Mill S90310.0 (1 offer) Regular length end mill with 3 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid c... |
|
£ 52.302*
per piece |
|
|
End Mill S90312.0 (1 offer) Regular length end mill with 3 flutes, diameter 12mm with 25mm length of cut, 73mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 12mm plain shank, solid c... |
|
£ 74.359*
per piece |
|
|
End Mill S90314.0 (1 offer) Regular length end mill with 3 flutes, diameter 14mm with 30mm length of cut, 83mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 14mm plain shank, solid c... |
|
£ 93.585*
per piece |
|
|
End Mill S90316.0 (1 offer) Regular length end mill with 3 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 16mm plain shank, solid c... |
|
£ 122.968*
per piece |
|
|
End Mill S90318.0 (1 offer) Regular length end mill with 3 flutes, diameter 18mm with 32mm length of cut, 92mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 18mm plain shank, solid c... |
|
£ 146.184*
per piece |
|
|
End Mill S9032.0 (1 offer) Regular length end mill with 3 flutes, diameter 2mm with 6mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid car... |
|
£ 22.592*
per piece |
|
|
End Mill S9032.5 (1 offer) Regular length end mill with 3 flutes, diameter 2.5mm with 9mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid c... |
|
£ 27.13*
per piece |
|
|
End Mill S9033.0 (1 offer) Regular length end mill with 3 flutes, diameter 3mm with 12mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid ca... |
|
£ 20.701*
per piece |
|
|
End Mill S9034.0 (1 offer) Regular length end mill with 3 flutes, diameter 4mm with 14mm length of cut, 50mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 4mm plain shank, solid ca... |
|
£ 23.632*
per piece |
|
|
End Mill S9035.0 (1 offer) Regular length end mill with 3 flutes, diameter 5mm with 16mm length of cut, 50mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 5mm plain shank, solid ca... |
|
£ 25.75*
per piece |
|
|
End Mill S9036.0 (1 offer) Regular length end mill with 3 flutes, diameter 6mm with 19mm length of cut, 57mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 6mm plain shank, solid ca... |
|
£ 27.76*
per piece |
|
|
End Mill S9037.0 (1 offer) Regular length end mill with 3 flutes, diameter 7mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
£ 39.69*
per piece |
|
|
End Mill S9038.0 (1 offer) Regular length end mill with 3 flutes, diameter 8mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
£ 37.739*
per piece |
|
|
End Mill S9039.0 (1 offer) Regular length end mill with 3 flutes, diameter 9mm with 21mm length of cut, 72mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid c... |
|
£ 46.768*
per piece |
|
|
End Mill S90410.0 (1 offer) Regular length end mill with 4 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid c... |
|
£ 38.818*
per piece |
|
|
End Mill S90412.0 (1 offer) Regular length end mill with 4 flutes, diameter 12mm with 25mm length of cut, 73mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 12mm plain shank, solid c... |
|
£ 55.183*
per piece |
|
|
End Mill S90414.0 (1 offer) Regular length end mill with 4 flutes, diameter 14mm with 30mm length of cut, 83mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 14mm plain shank, solid c... |
|
£ 69.508*
per piece |
|
|
End Mill S90416.0 (1 offer) Regular length end mill with 4 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 16mm plain shank, solid c... |
|
£ 91.259*
per piece |
|
|
End Mill S90418.0 (1 offer) Regular length end mill with 4 flutes, diameter 18mm with 32mm length of cut, 92mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 18mm plain shank, solid c... |
|
£ 108.485*
per piece |
|
|
End Mill S9042.0 (1 offer) Regular length end mill with 4 flutes, diameter 2mm with 6mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid car... |
|
£ 16.761*
per piece |
|
|
End Mill S9042.5 (1 offer) Regular length end mill with 4 flutes, diameter 2.5mm with 9mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid c... |
|
£ 20.137*
per piece |
|
|
End Mill S90420.0 (1 offer) Regular length end mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 0.3mm 45° chamfered corner edges, according to DORMER standard with a 20mm plain shank, solid ... |
|
£ 145.936*
per piece |
|
|
End Mill S9043.0 (1 offer) Regular length end mill with 4 flutes, diameter 3mm with 12mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid ca... |
|
£ 15.365*
per piece |
|
|
End Mill S9044.0 (1 offer) Regular length end mill with 4 flutes, diameter 4mm with 14mm length of cut, 50mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 4mm plain shank, solid ca... |
|
£ 17.533*
per piece |
|
|
End Mill S9045.0 (1 offer) Regular length end mill with 4 flutes, diameter 5mm with 16mm length of cut, 50mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 5mm plain shank, solid ca... |
|
£ 19.058*
per piece |
|
|
End Mill S9046.0 (1 offer) Regular length end mill with 4 flutes, diameter 6mm with 19mm length of cut, 57mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 6mm plain shank, solid ca... |
|
£ 20.602*
per piece |
|
|
End Mill S9047.0 (1 offer) Regular length end mill with 4 flutes, diameter 7mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
£ 29.453*
per piece |
|
|
End Mill S9048.0 (1 offer) Regular length end mill with 4 flutes, diameter 8mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
£ 28.008*
per piece |
|
|
End Mill S9049.0 (1 offer) Regular length end mill with 4 flutes, diameter 9mm with 21mm length of cut, 72mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid c... |
|
£ 34.71*
per piece |
|
|
Slot Drill C1101 (1 offer) Extra short series slot drill with 2 flutes, diameter 1" with 26mm length of cut 102mm overall length and 45.5mm reach with neck relief, according to DIN 327 D standard with a 25mm Weldon shank, po... |
|
£ 32.878*
per piece |
|
|
Slot Drill C1101.5 (1 offer) Extra short series slot drill with 2 flutes, diameter 1.5mm with 3mm length of cut and 47mm overall length, according to DIN 327 D standard with a 6mm Weldon shank, powder metallurgical HSS-E with ... |
|
£ 28.265*
per piece |
|
|
Slot Drill C1101/16 (1 offer) Extra short series slot drill with 2 flutes, diameter 1/16" with 3mm length of cut and 47mm overall length, according to DIN 327 D standard with a 6mm Weldon shank, powder metallurgical HSS-E with ... |
|
£ 24.06*
per piece |
|
|
Slot Drill C1101/2 (1 offer) Extra short series slot drill with 2 flutes, diameter 1/2" with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank, ... |
|
£ 51.411*
per piece |
|
|
Slot Drill C1101/8 (1 offer) Extra short series slot drill with 2 flutes, diameter 1/8" with 6mm length of cut and 50mm overall length, according to DIN 327 D standard with a 6mm Weldon shank, powder metallurgical HSS-E with b... |
|
£ 19.662*
per piece |
|
|
Slot Drill C11010.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 10mm with 13mm length of cut, 63mm overall length and 22.5mm reach with neck relief, according to DIN 327 D standard with a 10mm Weldon shank, ... |
|
from £ 24.80*
per piece |
|
|
Slot Drill C11011.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 11mm with 13mm length of cut and 70mm overall length, according to DIN 327 D standard with a 12mm Weldon shank, powder metallurgical HSS-E with... |
|
from £ 33.423*
per piece |
|
|
Slot Drill C11012.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 12mm with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank, ... |
|
£ 34.72*
per piece |
|
|
Slot Drill C11012.5 (1 offer) Extra short series slot drill with 2 flutes, diameter 12.5mm with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank... |
|
from £ 41.333*
per piece |
|
|
Slot Drill C11013.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 13mm with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank, ... |
|
from £ 41.452*
per piece |
|
|
Slot Drill C11014.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 14mm with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank, ... |
|
from £ 38.947*
per piece |
|
|
Slot Drill C11015.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 15mm with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank, ... |
|
£ 51.599*
per piece |
|
|
