Adjustable top support for a firmer fit. Adjustable top support, for a safer more secure mounting. The top support helps holding your unit into place in the holder. The support is adjustable in ord...
Angled mounting platform, 60°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.
Angled mounting platform, 30°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.
Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. For use with Apple original Lightning to USB Cable. This holder for cable attachmen...
For use with Apple original Lightning to USB Cable. Fits devices with skin. With tilt swivel. This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. F...
For use with Apple original Lightning to USB Cable. Fits devices with skin. With tilt swivel. Griffin USB/cig-plug adapter included. This holder for cable attachment can, combined with an Apple cab...
Mounting plate, with tilt swivel. Attention! Read all instructions before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the attaching part on the back. 2. ...
Mount for device with a TMC module. The choice when you want to get a firm installation on a ProClip Mounting Platform instead of using a suction cup mount. You can easily adjust the angle of your ...
This holder is the perfect choice when you want to have your device within reasy reach. The holder has an extra robust design. Attach the holder to any flat surface or a Pedestal Mount in a truck, ...
Passive holder with tilt swivel With your Z2 Tablet in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging...
Flexible arm, 25 cm. With predrilled AMPS-standard holes. A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to...
A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With thin ends, one pointy and one level end. Manufacutred in black ABS plastic.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to...
Motorcycle mount, is to be installed on the handle bar. To be used for installation of a PNA, GPS device, PDA etc. The mount is equiped with a tilt swivel, so you can adjust the device in order to ...
Motorcycle mount with tilt swivel plate, predrilled AMPS holes. 31,8 mm diameter. Motorcycle mount, is to be installed on the handle bar. To be used for installation of a PNA, GPS device, PDA etc. ...
Mounting plate with a big strong tilt swivel for installation of heavier devices such as larger monitors, laptops etc. Allows you to adjust the angle of the device and provides a flexible yet firm ...
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spri...
Extra high mounting platform. Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placem...
Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...
Universal mount for slot button and clip holder. With predrilled holes. Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip.
A small, oval face plate with predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15° in every direction.
Mounting plate (80x50x5mm). AMPS-standard. The choise when you want to install your device positioned a bit to the left or right than the center of the ProClip. Predrilled holes, AMPS standard. Mad...
Extension plate, 155x50x5mm. With predrilled AMPS holes. The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder...
Active holder for fixed installation With Molex adapter system. 2A charger. With tilt swivel. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installatio...
Active holder for fixed installation With tilt swivel, with Molex adapter system. 2A charger. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installatio...
Active holder with cig-plug With USB-cable with cig-plug adapter. With tilt swivel. The active holder charges your HTC 10 when it is in the holder. You can choose to connect the cig-plug to the car...
Active holder with cig-plug With USB-cable with cig-plug adapter. With tilt swivel. The active holder charges your Huawei P9 when it is in the holder. You can choose to connect the cig-plug to the ...
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug ad...
With USB-cable with cig-plug adapter. With tilt swivel. The active holder charges your Galaxy A3 (2016)7 when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket...
With tilt swivel, with Molex adapter system. 2A charger. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the int...
Active holder with cig-plug With USB-cable with cig-plug adapter. With tilt swivel. The active holder charges your smartphone when it is in the holder. You can choose to connect the cig-plug to the...
Use an active holder for your Nexus 9 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat in...
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach a charging cable to the holder. When you have attached the cable to the hold...
With Cigarette Lighter Cable, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V. Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy...
With tilt swivel, with Molex adapter system. 2A charger. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the int...
With tilt swivel, with Molex adapter system. 2A charger. NOT for leather back cover. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without...
With USB-cable with cig-plug adapter. With tilt swivel. The active holder charges your Droid Turbo 2 when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket, or...
The active holder charges your Droid Turbo 2 when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s ci...
With Molex adapter system. 2A charger. With tilt swivel. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the int...
With tilt swivel, with Molex adapter system. 2A charger. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the int...
With tilt swivel, with Molex adapter system. 2A charger. For Otterbox Defender Series. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation witho...
Active holder for fixed installation With tilt swivel, with Molex adapter system. 2A charger. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installatio...
Active holder for fixed installation. With tilt swivel, with Molex adapter system. 2A charger. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installati...