 | | | | |
Picture | | | | Order |
|
|
|
|
from £ 14.99*
per piece |
|
|
|
|
from £ 15.02*
per piece |
|
|
|
|
from £ 15.02*
per piece |
|
|
|
|
from £ 126.01*
per piece |
|
|
Label-the-cable Cable tube Black (2 offers) 25 m flexible, self-closing cable conduit, can be cut to individual lengths With LTC CABLE TUBE, cables are bundled faster than data flows through them. The lateral opening of the self-closing poly... |
|
from £ 126.25*
per piece |
|
|
|
|
from £ 24.01*
per piece |
|
|
|
|
from £ 14.19*
per piece |
|
|
|
|
from £ 12.10*
per piece |
|
|
Neutrik SCDR cable accessory Cable boot (4 offers) Soft plastic cover for the rear ends of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables – y... |
|
from £ 1.23*
per piece |
|
|
Neutrik SCCD-W electrical enclosure IP65 (3 offers) The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the ... |
|
from £ 8.57*
per piece |
|
|
Neutrik SCL port dust cover (2 offers) Dust protection cover for most speakON and powerCON chassis connectors. It can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel bel... |
|
from £ 1.59*
per piece |
|
|
Neutrik SCNO-FDW-A wire connector Black (2 offers) Rugged, all metal sealing cover for opticalCON chassis connectors Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chass... |
|
from £ 13.07*
per piece |
|
|
Neutrik NTR-NF2D-0 (2 offers) Phono socket in nickel D-shape housing, black isolation washers, solder version. |
|
from £ 3.60*
per piece |
|
|
Neutrik NTR-NF2D-2 (3 offers) Phono socket in nickel D-shape housing, red isolation washers, solder version. |
|
from £ 3.20*
per piece |
|
|
Neutrik NTR-NBB75DFIB (3 offers) The bulkhead connector offers a true 75 Ω design for serial and digital (HD) signals . The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use ... |
|
from £ 6.05*
per piece |
|
|
