Plumbing Tools (584 items)

Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in). Capable of sealing against pressures of up to 1.97 bar / 29 psi.

Monument 1379 Testing Plug. Size: 150mm (6 in). Capable of sealing against pressures of up to 1.62 bar / 24 psi.

Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has an easy to read triple scale bar in psi and kPa scales and is suitable for water, air, ga...

The Monument MON1368 1368U 2 Piece Test Plug Set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. They cannot be used for air testing purposes by th...

This Monument set of 6 Test Plugs contains the following small bore test plugs: 2 x 1370B 15mm Test Plugs. 2 x 1371E 22mm Test Plugs. 2 x 1372H 28mm Test Plugs. The plugs are used for blocking off ...

Monument Air Testing U-Gauge Kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4in) water gauge pressure on any size of drain or pipe. The kit is housed ...

The Monument 175C U-Gauge (also known as a Manometer) should be used to test for leaks after installation or repair of any drain or pipeline system. Made from unbreakable parts, it will test up to ...

Using Monument Hand Bellows, air may be carefully pumped into the pipe. Fitted with a positive, hand operated non-return valve. Designed for use with Monument Air testing U Gauge kit.

The Monument MON180 180S Nipple Cap are for attachment to drain test plug outlets to enable connection of rubber hose to the U Gauge. It is made from plastic with a washer. Specification: Size: 1/2...

This Monument Tee Piece for U Gauges connects three pieces of rubber hose together for convenient connection to U Gauge, bellows and nipple cap.

The Monument MON1445 1445F spare hose for connecting testing equipment comes in the following: Length: 1m. Internal Diameter: 10mm.

The Monument Air Bag is a durable, quality, flexible drain plug for plugging drains and pipes. Fitted with peripheral ribs that give a better seal and grip on the tube or pipe being repaired or rep...

The Monument 2580U Vent Sizing Gauge is used to measure the size of the slots in an air vent to calculate the area of ventilation provided by a vent where this info is not readily available. The ga...

The Monument Mains Water Pressure Testing Gauge with 3/4in BSP thread for fitting to taps. Maximum Pressure: 11 bar

This Monument Suction Plunger is ideal for clearing WC pan wastes and gullies. It is made from soft, flexible rubber and has a wooden T-handle. Rubber Diameter: 140mm (5.1/2in) Overall Length: 445m...