The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits s...
The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow...
This Monument 1277s is a replacement hose to fit gas test gauges. It has an internal diameter of 7/32 in (5.5mm). They are black nitrile for standard and are 1m in length (Coil). NOTE: Do not use t...
Monument 1279 Black replacement hose to fit gas test gauges, are 1m in length, and have an internal diameter of 7/32 in (5.5mm). Note: Do not use this hose for LPG (Liquified Petroleum Gas).
The Monument Air Bag Stopper is a durable, quality flexible air bag stopper for the plugging of drains and pipes. This bag is made with a durable nylon outer casing that gives the air bag a better ...
This Monument pump is for use on Schrader valves, and they are used for inflating flexible plugs and universal flexible plugs which are fitted with a Schrader valve. Note: inflate flexible plugs sl...
The Monument MON1368 1368U 2 Piece Test Plug Set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. They cannot be used for air testing purposes by th...
This Monument set of 6 Test Plugs contains the following small bore test plugs: 2 x 1370B 15mm Test Plugs. 2 x 1371E 22mm Test Plugs. 2 x 1372H 28mm Test Plugs. The plugs are used for blocking off ...
Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45m...
The Monument MON1377 1377W Drain Testing Plug comes with the following specifications: Size: 75mm (3 inch). Capable of sealing against pressures of up to 2.24 bar / 33 psi.
The Monument Hydro-jet Pump safely provides the explosive power of a water jet to unblock sinks, baths, showers, toilets, and drains. First you fill the unit with water then hold the unit over the ...
Monument one-piece Plunger, in black, for clearing sinks, basins, and bath wastes is both handy and popular. Exclusively patented bellows design allows more cubic centimetre displacement than tradi...
This Monument 1461 Micro Yellow Plunger is ideal for clearing small hand basins. This 100mm diameter plunger has a compact design for ease of storage. It is for use on bathroom and kitchen sinks. S...
This Monument 1469B Mini Snake Barbed Drain Unclogger quickly unclogs sinks, showers, bath drains, bathtubs, and laundry tubs. There is no need to remove the rose. Specifications: Size: 10mm. Leng...
The Monument 1470F Smoke Emitter Pellets give off a dense white low-toxic smoke when ignited. They have a burn time of 60 seconds and have an approximate volume of 15m³. They are used for testing f...
Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has an easy to read triple scale bar in psi and kPa scales and is suitable for water, air, ga...
The Monument 1515U Water Flow Weir Gauge is designed to measure water flow rates in order to determine if suitable flow is available in a building prior to the plumbing installation of washing mach...
The Monument 170 Stiffnuts, 27 x 32mm, Kit has been especially designed for removing stiff backnuts from awkwardly placed taps, and to make tap installation a more rapid process. This tool is for 1...
The Monument Autocut Twin Pack contains the following: 1715C: Size: 15mm. 1722Y: Size: 22mm Not for use on stainless steel. Spare wheel to fit is available MON269.
This Monument spare rubber hose is for use with U gauges. They have a coil length of 2m and an internal diameter of 7/32in (5.5mm). Specifications: Colour: Black. Length: 2m (78in) (coil).
Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP ta...
Monument Air Testing U-Gauge Kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4in) water gauge pressure on any size of drain or pipe. The kit is housed ...
The Monument 175C U-Gauge (also known as a Manometer) should be used to test for leaks after installation or repair of any drain or pipeline system. Made from unbreakable parts, it will test up to ...
Using Monument Hand Bellows, air may be carefully pumped into the pipe. Fitted with a positive, hand operated non-return valve. Designed for use with Monument Air testing U Gauge kit.
The Monument MON180 180S Nipple Cap are for attachment to drain test plug outlets to enable connection of rubber hose to the U Gauge. It is made from plastic with a washer. Specification: Size: 1/2...
