![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) |
Picture | | | | Order |
![](/p.gif) |
|
WRT Workshop Router Table 240V (3 offers) The Trend WRT Workshop Router Table has a steel leg frame with adjustable feet, a large, laminated MDF table and a quick-release aluminium extrusion back fence with sliding MDF cheeks. Its removabl... |
|
from £ 335.60* per piece |
|
|
VJS/CG/50 VariJig Clamp Guide 50in (2 offers) The Trend VJS/CG/50 VariJig clamp guide allows for accurate guiding of router, saws and jigsaws. Its integral clamping jaws and a locking lever provide a quick way of clamping the guide batten and ... |
|
from £ 50.64* per piece |
|
|
VJS/CG/36 Clamp Guide 36in (4 offers) The Guide Clamp features integral clamping jaws and a locking lever that provides quick way of clamping the guide batten. It is ideal for holding and clamping workpieces and the aluminium extrusion... |
|
from £ 42.62* per piece |
|
|
Vari Jig Angle Guide VJSAG36 (3 offers) The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45... |
|
from £ 77.17* per piece |
|
|
Universal Sub Base C/w Pins & Bush (4 offers) The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers. Line-up pin used with a 16 mm plastic bush to ensure ... |
|
from £ 23.36* per piece |
|
|
UNI/CS Countersink (3 offers) This TCT Countersink clamps onto any drill between 3 mm and 7.2 mm in diameter. The drill passes through the body of the countersink and is secured by two hexagon bolts which clamp the countersink ... |
|
from £ 28.47* per piece |
|
|
|
|
from £ 26.65* per piece |
|
|
|
|
from £ 33.51* per piece |
|
|
TR35 x 1/4 TCT Biscuit Jointer Set 4.0 x 37.2mm (3 offers) The Trend TR35 Biscuit Jointer Set enables biscuit jointing with timber, man-made fibre and particle board. The right choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0,... |
|
from £ 50.73* per piece |
|
|
|
|
from £ 51.58* per piece |
|
|
|
|
from £ 27.42* per piece |
|
|
TR28 x 1/2 TCT Bearing Guided Trimmer 12.7 x 50mm (3 offers) The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping’s and plastic laminate edges. Features 2mm micro grain tungsten carbide tip... |
|
from £ 45.45* per piece |
|
|
|
|
from £ 35.40* per piece |
|
|
|
|
from £ 30.83* per piece |
|
|
|
|
from £ 18.21* per piece |
|
|