Easy CAT6A connectivity—no punchdowns needed. - Staggered-port design provide more space between ports to minimize ANEXT and improve performance. - Guaranteed for life.
Features 48 CAT6 RJ-45 to RJ-45 feed-through ports. - Meets Category 6 performance requirements. - Cable management bar helps support cables attached to the rear of the panel.
Feed-through connectors provide super-easy patching. Just plug in cables. - Unique design features RJ-45 plugs on both sides of the patch panel. - Compliant with CAT6 specs. - Works with either T56...
The N254-048-SH-6A 48-Port 1U Rack-Mount STP Shielded Cat6a Feedthrough Patch Panel meets or exceeds Cat6a specifications and works with USOC, T568A and T568B wiring to comply with industry standar...
Features 48 CAT6 RJ-45 to RJ-45 feed-through ports. - Meets Category 6 performance requirements. - Cable management bar helps support cables attached to the rear of the panel.
The N254-024-SH-6A 24-Port 1U Rack-Mount STP Shielded Cat6a Feedthrough Patch Panel meets or exceeds Cat6a specifications and works with USOC, T568A and T568B wiring to comply with industry standar...
Easy CAT6A connectivity - no punchdowns needed. - Staggered-port design provide more space between ports to minimize ANEXT and improve performance. - Guaranteed for life.
The N492-036-LCLC-E is a pre-loaded 36-port LC/LC fiber patch enclosure that supports multimode and most singlemode LC Fiber cable patching. Features rugged heavy steel construction with multiple r...
Feed-through connectors provide super-easy patching. Just plug in cables. - Unique design features RJ-45 plugs on both sides of the patch panels. - Compliant with CAT6 specs. - Work with either T56...
Feed-through connectors provide super-easy patching. Just plug in cables. - Unique design features RJ-45 plugs on both sides of the patch panels. - Compliant with CAT6 specs. - Work with either T56...
Category 6/Class E punchdown patch panels terminate unshielded twisted 4-pair, 22 – 26 AWG, 100 ohm cable and mount to standard EIA 19" or 23" racks. Punchdown tool properly terminates each conduct...
19'' Fibre patch panel for up to 24 SC Simplex or LC Duplex adapters. The panel back side features 4 Ø20 mm inlets suitable for PG screw connection and 2 rectangular inlets 80 x 34 mm with blank pl...
Flat Flush Mount Modular Patch Panels - Accept Mini-Com® or Keystone Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes - Pre-printed numbers abo...
Belkin's 48 Port Cat6 Patch Panel is 19" rack mountable and supports both 568A and 568B standards. Compatible with both 110 and Krone punch down tools.
This 48-Port Cat6 110-Type Patch Panel is made for optimum performance with black electrostatic powder-coated steel and 50 micron gold-plated contacts. Every panel comes in traditional 6-port modul...
Do you need a cost effective solution to upgrade your Network with Power over Ethernet? Then the 720342 from Intellinet Network Solutions is your ideal solution. Intellinet Network Solutions is ren...
The equip® Patch Panel is a 19" 1U network distribution unit integrating cable management system for better routing and strain relief requirements, suitable for both LSA and 110 standards. Featurin...
Holds GigaTrue2 CAT 6, GigaBase2 CAT5e, CAT3, and USOC Jacks. - Works with GigaStation2 Snap Fittings. - Also available with 16, 24, or 36 ports in 1U or with 96 ports in 2U. Black Box High-Density...
Accept Mini-Com Modules for shielded applications - Provide write-on areas for port identification - Not recommended in applications where moves, adds, and changes are frequent - Mount to standard ...
IndustrialNet™ 8-port DIN rail mount copper patch panel. Mounting latches securely mount unit to standard DIN rail in industrial applications. Can also mount to other surfaces using mounting holes ...
module frame with 6 "E-DAT modul" individual modules - component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/20...
Accept Mini-Com Modules for shielded applications - Provide write-on areas for port identification - Not recommended in applications where moves, adds, and changes are frequent - Mount to standard ...
Features: - Release snap feature on faceplate allows front access to installed modules. - Accept Mini-Com® Modules for UTP, fiber optic and audio/video, which snap in and out for easy moves adds, a...
The backbone of your network is central to your organisation's success. Trust Intellinet Network Solutions to provide Patch Panels that maintain the integrity of your data. The Patch Panel enables ...
Mounted with 6 x LC Duplex Single Mode adapters. 12 pigtails pre-mounted in splice cassette. Rubber coated strain relief suitable for blown-fibre. The patch panel have fixtures for splice cassettes...
The Cablenet Cat6 UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110. Termination is...
Prepare yourself for Copper Gigabit Ethernet with TRENDnet´s Cat. 6 RJ-45 UTP Patch Panels. These patch panels are certified for 250Mhz Category 6, which are perfect for Copper Gigabit Ethernet con...
OM3/4 Multimode Loaded Fibre Patch Panel to accept 48 fibres connecting to 24 LC duplex adaptors. Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor...
The equip® Cat.6A Patch Panel is a 19" 1U network distribution unit integrating cable management system for better routing and strain relief requirements, suitable for Krone IDC standard. Featuring...
Release snap feature on faceplate allows front access to installed modules - Accept Mini-Com® Modules for UTP, fiber optic and audio/video, which snap in and out for easy moves adds, and changes - ...
The equip® Cat.6A Patch Panel is a 19" 1U network distribution unit integrating cable management system for better routing and strain relief requirements, suitable for Krone IDC standard. Featuring...
The Cablenet Cat5e UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110. Termination i...
Holds GigaTrue2 CAT 6, GigaBase2 CAT5e, CAT3, and USOC Jacks. - Works with GigaStation2 Snap Fittings. - Also available with 16 or 36 ports in 1U or with 48 or 96 ports in 2U. Black Box High-Densit...
OM3/4 Multimode Loaded Fibre Patch Panel to accept 12 fibres connecting to 6 LC duplex adaptors. Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor....
Cat6a Shielded Patch Panel for proper network connections The Intellinet Network Solutions Cat6a Shielded Patch Panel helps IT staff create the right Cat6a-compliant network for their organization....
The equip® Patch Panel is a 19" 1U network distribution unit integrating cable management system for better routing and strain relief requirements, suitable for both LSA and 110 standards. Featurin...
The equip® Patch Panel is a 19" 1U network distribution unit integrating cable management system for better routing and strain relief requirements, suitable for both LSA and 110 standards. Featurin...
This 24-Port Cat6 110-Type Patch Panel is made for optimum performance with black electrostatic powder-coated steel and 50 micron gold-plated contacts. Every panel comes in traditional 6-port modul...
This Cat6a 24 Port Shielded PCB Patch Panel 1u offers Cat6a compliant performance and supports high speed protocols such as 10G Ethernet. The panel is backwards compatible to all preceding cabling ...
