network splitters (34 items)

The PoE Splitter POE10R (TL-POE10R) fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK...

The RJ45SPLITTER 2-to-1 RJ45 Splitter Cable Adapter increases the number of RJ45 network connections on an RJ45 outlet, allowing two 10/100 Ethernet signals through a single Cat5/Cat5e wire. On one...

Ethernet to RJ45 + MicroUSB Black, Compliant with IEEE 802.3af

TP-LINK’s PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard. It can receive power and data from all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Injector, such as T...

The LogiLink Cat5e Ethernet splitter allows two separate devices to share the same Ethernet cable. Ethernet splitters are generally used in pairs, with one cat5e splitter at the outlet and another ...

This cable connector by Delock can be used to connect or extend two RJ45 network cables and is ideal for outdoor use e.g. in the garden. With this RJ45 coupler there is a waterproof cable entry on ...

DIGITUS USB-A 5V PoE Splitter PoE splitter provides power 5Vdc, 2.5A(max) via USB-A Female connector and data signal at 10/100Mbps Benefits: Provide USB 5V power by PoE splitter PoE Input :40-57Vdc...

TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power an...

2wIP Splitter for 4 Lines / only for 5627, 5800, 5801

The RJ45 network splitter is easy to transfer, just plug in a network cable to connect, and 4 devices can go online simultaneously. Simple, fast, and cost-saving (Note: USB power supply required, c...

MC-POESPLITTER-CW is an indoor rated PoE USB-C splitter specially designed for complex backhaul and networking application. Enclosed in an IP40 fire retardant plastic case with compact design. It w...

The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. I...

The LevelOne POS-1002 PoE Splitter splits a networked PoE signal into a separate power and Fast Ethernet data sources. This device allows administrators to run Fast Ethernet speed PoE cables over l...

The GP-101ST Gigabit PoE (Power over Ethernet) Splitter delivers both data and electrical power to non-PoE Fast Ethernet or Gigabit Ethernet–enabled products such as network cameras and wireless ac...

PLANET IEEE POE-162S 802.3at Gigabit Power over Ethernet Plus Splitter complies with IEEE 802.3at Power over Ethernet Plus standard that supports a maximum of 25.5 watts of input power. The POE-162...