| | | | |
Picture | | | | Order |
|
|
TREND 1004/20TC LIP & SPUR TWO WING BIT 20MM DIA (1 offer) |These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a ve... |
|
from £ 59.07* per piece |
|
|
Trend - Bevel cutter - 11/5X1/2TC (1 offer) Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board. Dimension... |
|
from £ 31.51* per piece |
|
|
|
|
from £ 41.83* per piece |
|
|
Trend 2/10 X 1/4 High Speed Steel One Flute Cutter (1 offer) Trend 2/10 x 1/4 HSS Single Flute Cutter 2.0 x 5.0mm TRE21014HS Trend HSS single flute straight cutter made from a single piece of High Speed Steel, ground with a very fine edge. They are only suit... |
|
from £ 10.62* per piece |
|
|
Trend - Tapered plug 5/8 inch diameter - 24/2X1/2TC (1 offer) A Tapered plug ensures an exceptionally tight fit is achieved. Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required. For use in drilli... |
|
from £ 79.04* per piece |
|
|
|
|
from £ 40.03* per piece |
|
|
Trend 3/01 X 1/4 Tungsten Carbide Two Flute Cutter (4 offers) Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0mm x 11mm TRE30114TC Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising an... |
|
from £ 21.45* per piece |
|
|
TREND 3/04X1/4TC TWO FLUTE 2.5MM DIA X 8MM CUT (1 offer) Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT pl... |
|
from £ 23.97* per piece |
|
|
Trend - 3/06X1/4TC - Two flute cutter 2 mm diameter (1 offer) TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge... |
|
from £ 27.76* per piece |
|
|
Trend 3/10 X 1/4 Tungsten Carbide Two Flute Cutter (4 offers) Trend 3/10 x 1/4 TCT Two Flute Cutter 3.2mm x 11mm TRE31014TC Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising ... |
|
from £ 21.34* per piece |
|
|
Trend 3/1 X 1/4 Tungsten Carbide Two Flute Cutter (4 offers) Trend 3/1 x 1/4 TCT Two Flute Cutter 5.0mm x 16mm TRE3114TC Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and ... |
|
from £ 24.66* per piece |
|
|
Trend 3/20 X 1/4 High Speed Steel Two Flute Cutter (1 offer) These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally H... |
|
from £ 16.64* per piece |
|
|
Trend 3/22 X 1/4 Tungsten Carbide Two Flute Cutter (4 offers) Trend 3/22 x 1/4 TCT Two Flute Cutter 6.3mm x 25mm TRE32214TC Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising an... |
|
from £ 25.40* per piece |
|
|
Trend 3/2 X 1/4 Tungsten Carbide Two Flute Cutter (3 offers) TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge... |
|
from £ 27.02* per piece |
|
|
Trend 3/4 X 1/4 Tungsten Carbide Two Flute Cutter (4 offers) Trend 3/4 x 1/4 TCT Two Flute Cutter 8.0mm x 19mm TRE3414TC Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and ... |
|
from £ 25.99* per piece |
|
|