| | | | |
Picture | | | | Order |
|
|
|
|
from £ 13.94* per piece |
|
|
COLLET SLEEVE 8MM TO 12.7MM CLT/SLV/8127 (4 offers) Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for exte... |
|
from £ 13.52* per piece |
|
|
|
|
from £ 22.36* per piece |
|
|
|
|
from £ 15.53* per piece |
|
|
|
|
from £ 12.91* per piece |
|
|
|
|
from £ 14.73* per piece |
|
|
|
|
from £ 21.47* per piece |
|
|
|
|
from £ 38.10* per piece |
|
|
|
|
from £ 23.12* per piece |
|
|
|
|
from £ 22.31* per piece |
|
|
|
|
from £ 17.71* per piece |
|
|
|
|
from £ 20.51* per piece |
|
|
|
|
from £ 16.04* per piece |
|
|
|
|
from £ 70.64* per piece |
|
|
Snappy Snappc12 Plug Cutter 1/2 Inch (4 offers) TREND SNAP/PC/12 Snappy Standard Plug Cutters 12.7mm - Made from Tool Steel they allow for longer plugs to be drilled. - Plugs are parallel sided. - Recommended for use with a pillar drill. TREND S... |
|
from £ 16.39* per piece |
|
|
TREND 1004/20TC LIP & SPUR TWO WING BIT 20MM DIA (1 offer) |These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a ve... |
|
from £ 58.93* per piece |
|
|
|
|
from £ 41.74* per piece |
|
|
TREND 3/04X1/4TC TWO FLUTE 2.5MM DIA X 8MM CUT (1 offer) Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT pl... |
|
from £ 24.01* per piece |
|
|
|
|
from £ 24.40* per piece |
|
|
TREND 3/8X1/2TC TWO FLUTE 12MM DIA X 19MM CUT (1 offer) Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT pl... |
|
from £ 32.70* per piece |
|
|
TREND 33/60X1/2 ARBOR FOR GROOVER (1 offer) Standard duty arbor with 1/4 inch spindle and spacers.|Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with lar... |
|
from £ 18.46* per piece |
|
|
TREND 46/44X1/4TC 24mm Rebater (4 offers) Features Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Ideal with delicate applications such as musical instrument production, when a small rebat... |
|
from £ 63.39* per piece |
|
|
|
|
from £ 30.03* per piece |
|
|
|
|
from £ 43.48* per piece |
|
|
|
|
from £ 20.28* per piece |
|
|
|
|
from £ 21.82* per piece |
|
|
|
|
from £ 20.28* per piece |
|
|
|
|
from £ 20.28* per piece |
|
|
TREND C004X1/4TC TWO FLUTE 5MM DIA X 16MM CUT (1 offer) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature... |
|
from £ 19.48* per piece |
|
|
TREND C005BX1/4TC TWO FLUTE 6.0MM DIA X 20MM CUT (1 offer) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature... |
|
from £ 14.73* per piece |
|
|
TREND C012X1/4TC TWO FLUTE 7.9MM DIA X 25.4MM CUT (1 offer) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature... |
|
from £ 16.35* per piece |
|
|
TREND C016CX1/4TC TWO FLUTE 10MM DIA X 25MM (1 offer) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. |
|
from £ 22.06* per piece |
|
|
TREND C019AX1/4TC TWO FLUTE 12MM DIA X 19MM CUT C/T (5 offers) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature... |
|
from £ 12.00* per piece |
|
|
TREND C021X1/2TC TWO FLUTE 12.7MM DIA X 25.4MM CUT (1 offer) |Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. |
|
from £ 20.59* per piece |
|
|
TREND C024AX1/2TC TWO FLUTE 15MM DIA X 25MM CUT (1 offer) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. |
|
from £ 22.79* per piece |
|
|
TREND C029X1/4TC TWO FLUTE 19.1MM DIA X 19.1MM CUT (1 offer) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature... |
|
from £ 20.60* per piece |
|
|
TREND C033X1/4TC TWO FLUTE 25.4MM DIA X 19.1MM CUT (1 offer) Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature... |
|
from £ 26.56* per piece |
|
|
|
|
from £ 37.73* per piece |
|
|
TREND C164X1/2TC Two Flute Cutter 12.7mm Diameter (1 offer) Supplied By IDEABRIGHT LTD Description TREND TREND C164X1/2TC TREND C164X1/2TC Two Flute Cutter 12.7mm Diameter - Suitable For A Wide Range Of Applications Such As Engraving, Grooving, - Rebating A... |
|
from £ 31.79* per piece |
|
|
|
|
from £ 6.12* per piece |
|
|
|
|
from £ 33.79* per piece |
|
|
|
|
from £ 31.82* per piece |
|
|
|
|
from £ 15.13* per piece |
|
|
|
|
from £ 27.23* per piece |
|
|
|
|
from £ 24.29* per piece |
|
|
|
|
from £ 16.08* per piece |
|
|
|
|
from £ 40.59* per piece |
|
|
TREND GB10 GUIDE BUSH 10MM DIA (1 offer) Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or ... |
|
from £ 12.33* per piece |
|
|
TREND GB14 GUIDE BUSH 14MM DIA (1 offer) Guide bush guides the router when using a template. |Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or... |
|
from £ 12.37* per piece |
|
|
TREND GB16 GUIDE BUSH 16MM DIA (2 offers) Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or ... |
|
from £ 5.65* per piece |
|
|
TREND GB20 GUIDE BUSH 20MM DIA (1 offer) Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or ... |
|
from £ 12.36* per piece |
|
|
TREND GB22 22mm Diameter Guide Bush (1 offer) TREND GB22 22mm Diameter Guide Bush- Guide bush guides the router when using a template.- Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. - Will fit other... |
|
from £ 12.37* per piece |
|
|
TREND GB26 GUIDE BUSH 26MM DIA (1 offer) Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or ... |
|
from £ 12.37* per piece |
|
|
TREND GB28 GUIDE BUSH 28MM DIA (1 offer) Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or ... |
|
from £ 12.40* per piece |
|
|
TREND GB40 GUIDE BUSH 40MM DIA (1 offer) Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or ... |
|
from £ 12.33* per piece |
|
|
|
|
from £ 36.34* per piece |
|
|
|
|
from £ 36.43* per piece |
|
|
|
|
from £ 66.86* per piece |
|
|
TREND PH/JIG/BK 3 in 1 POCKET HOLE JIG (3 offers) Features Hardened drilling sleeves for accurate, consistent pockets Works with timber thicknesses from 12.7mm to 38mm Multi-function design for twin hole or single hole pockets Perfect for wide or ... |
|
from £ 36.48* per piece |
|
|
|
|
from £ 21.86* per piece |
|
|
|
|
from £ 20.29* per piece |
|
|
TREND RT/13X1/2TC ROTA-TIP 12.7MM DIA X 49.5MM CUT (1 offer) Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated ... |
|
from £ 91.62* per piece |
|
|
|
|
from £ 36.77* per piece |
|
|
|
|
from £ 82.23* per piece |
|
|
TREND SET/SS11X1/2TC 6 Piece Starter Set (3 offers) This six piece cutter set contains a range of Tungsten Carbide Tipped cutters for decorative woodworking. Features For softwood, hardwood, chipboard, plywood and MDF Excellent value for money Suppl... |
|
from £ 20.16* per piece |
|
|
|
|
from £ 54.64* per piece |
|
|
TREND SET/SS35X1/2TC 35 Piece Starter Cutter Set (3 offers) Features 1/2- inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Supplied in aluminium carry case. Specification Shank Diameter - 1/2 inch Standard ... |
|
from £ 75.33* per piece |
|
|
TREND SNAP/BH/ID Snappy Impact Bit Holder 66MM (1 offer) The Trend SNAPBHID 66mm Impact Driver Bit Holder is a magnetic holder for use in quick tool change drills. Its two piece design is best for use with high torque applications, and allows you to comp... |
|
from £ 15.43* per piece |
|
|
TREND SNAP/BH/ID/A Impact Bit Holder 150MM (1 offer) The Trend SNAPBHIDA 150mm Impact Driver Bit Holder is a magnetic holder for use in quick tool change drills. Its two piece design is best for use with high torque applications, and allows you to co... |
|
from £ 19.95* per piece |
|
|
|
|
from £ 15.85* per piece |
|
|
TREND SNAP/BH/OT Snappy One Touch Bit Holder 66mm (1 offer) Trend SNAP/BH/OT bit Holder Magnetic Holder for 25mm insert bits. One touch quick and easy release of insert bit. Small 10.3mm diameter to allow access into tighter spaces. Pressing the button will... |
|
from £ 11.39* per piece |
|
|
|
|
from £ 7.63* per piece |
|
|
|
|
from £ 25.57* per piece |
|
|
|
|
from £ 16.62* per piece |
|
|
TREND SNAP/QCM MAGNETIC BIT HOLDER (1 offer) Magnetic screwdriver bit holder will hold screws onto 25mm insert bits. Retractable rubberised barrel ensures screwdriver bits do not jump out of screw head. Dimensions: Shank Diameter=1/4 inch hex... |
|
from £ 7.76* per piece |
|
|
|
|
from £ 19.54* per piece |
|
|
|
|
from £ 6.99* per piece |
|
|
TREND STEALTH/ML Air Stealth Half Mask Medium/Large (4 offers) This is the new generation P3R half mask, ergonomically designed with low profile design. The large filters available (STEALTH/1 or STEALTH/3) offer less breathing resistance, which means more comf... |
|
from £ 18.15* per piece |
|
|
TREND STEALTH/SM Air Stealth Half Mask Small/Medium (3 offers) This is the new generation P3R half mask, ergonomically designed with low profile design. The large filters available (STEALTH/1 or STEALTH/3) offer less breathing resistance, which means more comf... |
|
from £ 18.15* per piece |
|
|
|
|
from £ 419.51* per piece |
|
|
TREND UNI/GB16 UNIBASE GUIDE BUSH 16MM OD (1 offer) Replacement 16mm plastic line-up guide bush for the UNIBASE. Dimensions: Outside diameter=16mm Diameter Metric: 16 Diameter 2 Metric: 60 Cut Length Metric: 6 |
|
from £ 6.64* per piece |
|
|
TREND WINBAG Inflatable Air Bag (1 offer) The Trend WINBAG Inflatable Air Bag is ideal for installing doors, cabinets, windows and appliances. Its multi-use function can be used to lift, separate, protect and hold objects and is great for ... |
|
from £ 20.82* per piece |
|
|
|
|
from £ 40.32* per piece |
|
|
Trend - 3/06X1/4TC - Two flute cutter 2 mm diameter (1 offer) TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge... |
|
from £ 27.77* per piece |
|
|
Trend - 32/10X1/2TC - Stair trenching cutter (1 offer) Purpose made for stair housing jigs. Ensures tight fit of tread in string. Dimensions: D=14 mm C=20 mm A=95 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Grade: TCT Diameter Metric: 14 Cut Le... |
|
from £ 62.24* per piece |
|
|
Trend - Acrylic spiral upcut cutter - S60/06X1/4STC (1 offer) Up-cut helical gives long lasting super fine finish. Dimensions: D=15/64 inch D=6 mm C=3/4 inch C=19 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade: STC Diameter Imperial: 15/64 Diameter Metr... |
|
from £ 55.14* per piece |
|
|
Trend - Bearing 25.4mm diameter 15mm bore - B254G (1 offer) Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing f... |
|
from £ 16.23* per piece |
|
|
|
|
from £ 58.53* per piece |
|
|
|
|
from £ 44.59* per piece |
|
|
|
|
from £ 44.58* per piece |
|
|
|
|
from £ 46.35* per piece |
|
|
Trend - Bevel cutter - 11/5X1/2TC (1 offer) Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board. Dimension... |
|
from £ 31.65* per piece |
|
|
|
|
from £ 35.22* per piece |
|
|
|
|
from £ 33.37* per piece |
|
|
|
|
from £ 55.78* per piece |
|
|
|
|
from £ 27.45* per piece |
|
|
|
|
from £ 26.53* per piece |
|
|
|
|
from £ 58.25* per piece |
|
|
|
|
from £ 44.69* per piece |
|
|
|
|
from £ 139.19* per piece |
|
|