 | | | | |
Picture | | | | Order |
|
|
Frequency / Pulse signal conditioner (1 offer) This signal conditioner accepts frequency and pulse sensor outputs with a frequency range between (0.1 to 65000) Hz in standard configuration and (DC to 1000) Hz in counter mode. Typical applicatio... |
Status Instruments SEM1600/F |
from £ 165.02*
per piece |
|
|
Load Cell signal conditioner (2 offers) The loadcell amplifier SEM1600/B is a �smart� powered bridge loadcell amplifier for use with load cell signals. The product has a built in capability to scale the input signal to a process value wh... |
Status Instruments SEM1600/B |
from £ 165.05*
per piece |
|
|
Loop Isolator (1 offer) The SEM1000 ground loop isolator is designed to be series connected into a new or existing (4 to 20) mA current loop and provide an isolated (4 to 20) mA signal capable of driving into 300 ? maximu... |
Status Instruments SEM1000 |
from £ 105.09*
per piece |
|
|
Loop powered input with 2 relay outputs (1 offer) Loop powered trip amplifier. The SEM1636 monitors a (4 to 20) mA loop and provides two independent change over trip contacts set to trip at any point within the (4 to 20) mA range. The SEM1636 requ... |
Status Instruments SEM1636 |
from £ 114.12*
per piece |
|
|
Loop splitter (1 offer) The SEM 1200 is a current loop splitter and isolator, providing two separate isolated (4 to 20) mA current signals from a primary loop. The output loops must be powered externally. This current loo... |
Status Instruments SEM1200 |
from £ 131.63*
per piece |
|
|
Loop voltage booster (1 offer) The SEM1020 current loop booster is designed for use when power is available at both sides of the isolation barrier (joining two powered loops together) and hence adds additional load capacity to a... |
Status Instruments SEM1020 |
from £ 96.13*
per piece |
|
|
Process Signal mA or volate signal conditioner (1 offer) The SEM1600VI is a �smart� powered isolator/conditioner that accepts any voltage signal between (-50 and 50) V dc or any current signal between (-50 and 50) mA. The output stage offers either volta... |
Status Instruments SEM1600/VI |
from £ 124.92*
per piece |
|
|
Pt100, thermocouple, potentiometer signal conditioner (2 offers) The SEM1600T accepts signals from RTD, Potentiometer or Thermocouple sensors. Other sensor characteristics, or your own 22 point linearisation characteristic (for potentiometers, linear resistance ... |
Status Instruments SEM1600/T |
from £ 125.21*
per piece |
|
|
Universal input with 2 relay outputs (1 offer) Universal trip amplifier SEM1630, provides a dual relay switch function for RTD or Thermocouple sensors as well as mA and mV signals. Its relays can be programmed to be either high or low alarms. |
Status Instruments SEM1630 |
from £ 129.25*
per piece |
|
|
Universal signal conditioner (1 offer) Universal signal conditioner, the SEM1700 is a DIN rail mounted and accepts RTD, Thermocouple, Voltage, Current and Potentiometer sensor inputs and provides the user with a programmable current or ... |
Status Instruments SEM1700 |
from £ 161.36*
per piece |
|
