Door Entry Systems (24 items)

The RFID Key Fob is available for use with the GDS series and the USB RFID Card Reader. This non-writable proximity induction card receives radio energy from the RFID Card Reader to power the card ...

Exterior Weather Hood (3 Modules)

The FMBB3 is a back box that is fixed into the wall and should always be used in conjunction with the EWH3 when being installed outside.

The In-Wall Mounting Kit is available for use with the GDS3710 and GDS3705. This mounting kit allows the GDS series to be mounted flushed within a wall rather on the surface of the wall. It support...

The GDS3710 is an IP Video Door System that also serves as a hi gh-definition IP surveillance camera and IP intercom to offer facility access control and security monitoring for buildings of all si...

For internal doors where safety is paramount. In the event of a power failure, the 300KG Mag Lock will release immediately allowing for fast evacuation. During normal operation, exit would be via t...

PSU- PSU/3 - Battery Backup Enabled For use with larger applications (e.g. using Magnetic Locks, etc.). Battery bought separately - See PSU/3-B

PSU- PSU/3 - Battery Backup Enabled For use with larger applications (e.g. using Magnetic Locks, etc.). Battery bought separately - See PSU/3-B

The Key Fob is used with the RFID - Standalone Proximity Access Module.

The RFID Card is available for use with the GDS3710 and the USB RFID Card Reader. This nonwritable proximity induction card receives radio energy from the RFID Card Reader to power the card and its...

Programming strap to enable programming via a PC USB2 connection

For external doors where security is paramount. In the event of a power failure, the 500KG Mag Lock will remain powered by the backup battery allowing exit in the usual manner via the Push to Exit ...