Router Bits (226 items)

8 mm Shank. D = 6 mm C = 14 mm OL = 60 mm

8 mm Shank. D = 5 mm C = 12 mm OL = 60 mm

8 mm Shank. D = 5 mm C = 12 mm OL = 60 mm

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Di...

This Trend 47/4 x 1/4 TCT Pierce & Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide follower. Specifications: Single Flute cutter. Cuttin...

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tool...

Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90° D = 19.1 mm C = 25.4 mm

Tooling Tungsten Carbide 1/4 in Shank. Angle A = 90° D = 15.9 mm C = 19.1 mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tool...

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tool...

This trimmer has twin bearings for stability by increasing the bearing surface. An industrial profiling tool for longer runs of work when a clean finish is needed. T.C.T. 1/2in Shank A Angle = 90° ...

An industrial profiling tool for longer runs of work when a clean finish is needed. Tooling : T.C.T. 1/4in Shank.. A Angle = 90° C = 25.4 mm D = 12.7 mm

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut. This set is ideal for rebating straight and shaped work piec...

1/4in Shank. By changing the bearing the size of the rebate can be altered. Supplied with four bearings. 19 mm Bearing gives rebate of 7.9 mm 16 mm Diameter gives rebate of 9.5 mm 12.7 mm Diameter ...

1/2in Shank. By changing the bearing the size of the rebate can be altered. Supplied with 4 bearings. Use of : 19 mm Bearing gives rebate of 7.9 mm. 16 mm Bearing gives rebate of 9.5 mm. 12.7 mm Be...