Pipe & Drain Test Equipment (42 items)

The Monument Air Bag Stopper is a durable, quality flexible air bag stopper for the plugging of drains and pipes. This bag is made with a durable nylon outer casing that gives the air bag a better ...

This Monument pump is for use on Schrader valves, and they are used for inflating flexible plugs and universal flexible plugs which are fitted with a Schrader valve. Note: inflate flexible plugs sl...

The Monument MON1368 1368U 2 Piece Test Plug Set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. They cannot be used for air testing purposes by th...

This Monument set of 6 Test Plugs contains the following small bore test plugs: 2 x 1370B 15mm Test Plugs. 2 x 1371E 22mm Test Plugs. 2 x 1372H 28mm Test Plugs. The plugs are used for blocking off ...

Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45m...

Diameter range: 48-62mm. Maximum allowable back pressure: 37psi (2.50bar). 1/2 in BSP outlet.

The Monument MON1377 1377W Drain Testing Plug comes with the following specifications: Size: 75mm (3 inch). Capable of sealing against pressures of up to 2.24 bar / 33 psi.

Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in). Capable of sealing against pressures of up to 1.97 bar / 29 psi.

Monument 1379 Testing Plug. Size: 150mm (6 in). Capable of sealing against pressures of up to 1.62 bar / 24 psi.

The Monument MON1445 1445F spare hose for connecting testing equipment comes in the following: Length: 1m. Internal Diameter: 10mm.

This Ridgid manual pressure test pump is ideal for leaks in installations which are required to be leak proof. Especially for use in heating, compressed air, refrigeration systems, oil installation...

Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has an easy to read triple scale bar in psi and kPa scales and is suitable for water, air, ga...

The Monument 1515U Water Flow Weir Gauge is designed to measure water flow rates in order to determine if suitable flow is available in a building prior to the plumbing installation of washing mach...

Monument Air Testing U-Gauge Kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4in) water gauge pressure on any size of drain or pipe. The kit is housed ...

The Monument 175C U-Gauge (also known as a Manometer) should be used to test for leaks after installation or repair of any drain or pipeline system. Made from unbreakable parts, it will test up to ...