Lightweight and ideal for measuring inside diameters, the rods are solid, insulated and assembled on one side of the micrometer head. Anvils on rods are adjustable for length. Rod and anvils are ha...
The Moore & Wright Traditional External Micrometer has a pearl chrome plated frame with insulation pads, tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, lockin...
The 1965 Traditional External Micrometer has the following specification: Micrometer Range: 0-1in. Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in. Resolution: 0.001in.
The 1965M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm. Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm. Resolution: 0.001mm.
The 1966/2 Traditional External Micrometer has the following specification: Micrometer Range: 1-2in. Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in. Resolution: 0.0...
The 1966M/50 Traditional External Micrometer has the following specification: Micrometer Range: 25-50mm. Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm. Resolution: 0.0...
This micrometer has a 63.5mm (2.1/2in) base and 3.2mm (1/8in) diameter measuring rod. Base and rod are hardened, ground and lapped. Furnished with ratchet stop, lock nut and case. Size: 0-75mm. Rod...
The Moore & Wright 890M Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience. Conforms to ...
The Moore & Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods, with a 4mm diameter. These adjustable depth micrometers conform to BS6468:1984. Base Length: 63.5mm / ...
The Moore & Wright 200 Series MW200-01 Analogue External Micrometer has a hammertone finish frame with an insulated grip, a satin chrome scale and tungsten carbide measuring faces. It has a tapered...
The Moore & Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It ...
The Moore & Wright MW279-01A Micrometer Stand is designed for micrometers up to 100mm (4in). It has a painted cast iron base with plastic covered clamping jaws and the angle of the jaws can be adju...
This Stuarts Micrometer Engineers Blue is used in marking out in the workshop/garage for locating high spots on steel surfaces when checking valve seals, and has many other uses. It gives a clear p...