The Trend Anglefix is a must have accessory for quick, accurate mitre saw setup when cutting mitres. It is simple to use, the desired angle is taken by wrapping around the desired internal or exter...
The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high-speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened. Ideal for use ...
The Trend CDJ300 Craft Dovetail Jig is accurate and easy-to-use for a variety of elegant dovetail joints. It cuts 12.7mm (1/2in) wide half blind dovetails or rebated dovetails in one operation. The...
Holds door while drilling and fitting locks. No set-up time needed. No more searching and alternative door stops. Padded to prevent door and floor damage. For doors up to 55 mm thick. Patent No. PC...
The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door ...
The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined phenolic. It provides a 0.5° fall with grooves ...
A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames. It is easy-to-use with minimal setting-up time, completing the job both accurately and quickly. U...
The Trend Skeleton Hinge Jig is a 2-part, adjustable portable template set designed for recessing hinges in wooden doors and frames with a router. It is easy to use with minimal setting-up time, en...
The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops to increase productivity with excellent results. Four aper...
Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including sett...
The KWJ700 has fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm worktops. Length: 985mm. Width: 390mm. Thickness: 12 mm. Weight: 5.4 kg. End Cut: 45°. Corner Radii...
The Trend Pro Multi-Material Jig cuts a full male and female joint in 15 minutes, including setting up. All settings are done from the front edge, eliminating any discrepancies from scribing or whe...
Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right...
The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sash mortice and dead locks with up to 3in deep mortices and a 7/8in or 1in face plate. ...
The world's fastest professional worktop scriber tool. It completes traditional scribing chores with precision, speed and ease. Quick and easy-to-use by remaining stable whilst scribing directly on...
The Trend MS/PRO Multiscribe Profile Matching Tool scribes internal and external curves, marks parallel lines with fast, easy adjustable backset to suit the scribing gap. It also has a square and m...
The Trend Mortice & Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints. There is a one set-up system for both mortice and...
The Trend PH/JIG Pocket Hole Jig is supplied with: 100 x Dome Head Screws, 1 x Face Clamp, 1 x HSS Drill Bit With Collar, 1 x 75mm Square Drive Bit, 1 x 150mm Square Drive Bit.
Trend PH/JIG/BK 3-in-1 Pocket Hole Jig for fast and accurate joining of timber and plywood, giving strong instant joints. Multi-function design for twin hole or single hole pockets, perfect for wid...
The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cab...
Trend PH/JIG/C Twin Pocket Hole Jig for new projects, strengthening and repair work in materials from 12.7mm to 38mm thick. With hardened, full-length drill guides for precision pockets and a long ...
This Trend STAIR/AStaircase Jig is a template jig with well proven means of routing out stair housings quickly and accurately. It is constructed from hard wearing compact grade high pressure lamina...
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45...
