This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using ...
The Faithfull 4 Way Chuck Key is a convenient four armed chuck key suitable for use on many electric or cordless drills and bench mounted power tools that are fitted with a keyed chuck of 10 or 13m...
The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines. When used with SDS machines, the drill MUST NOT be used in hammer mode 1/2in x 20 UNF thread. Capacity 13m...
Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use these chucks can be operated by hand for fast bit changes. Capacity 0.8 -10mm 3/8in x 24 UNF thread ...
This Faithfull handy SDS Square Drive Adaptor 3 Piece Set will convert your SDS drill into a useful tool for setting and removing nuts, bolts and coach bolts. The adaptors cover three common drive ...
The HiKOKI 711099 Keyless Chuck and Adaptor allows you to convert your SDS Plus Chuck into a 13mm Keyless Chuck. For use with SDS Plus Drill to allow you to use conventional drill bits.
The DEWALT twin plastic sleeved keyless chuck can be used with both corded and cordless drills with the following specifications: Fitment: 1/2 inch x 20 UNF. Chuck Capacity: 13mm.
The DEWALT DEWDT7012QZ keyed chuck can be used for corded and cordless drills and has the following specifications: Chuck capacity: 13mm. Fitment: 1/2 inch x 20 unf.
The DEWALT SDS-Plus 1/2in x 20 UNF chuck adaptor. This adaptor is for connecting a standard 1/2in x 20 UNF chuck into an SDS+ drill. It comes with screwdriver bit. Specification: Weight: 60g.
Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes. The all steel construction provides a long...
The Quick Chuck will fit any power drill that uses a standard 9.5 mm (3/8in) key or keyless chuck. Attachments such as the snappy range or direct drive 1/4in screwdriver bits will then snap in and ...
The HiKOKI Chuck & Key, industrial quality, with fully hardened and ground working components. Offers exceptionally high accuracy, gripping power and durability. Capacity: 13mm 1/2 x 20 UNF
The Trend SNAP/HKLC/6 Keyless Chuck can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch. Clamping capacity: 0.8 mm (1/32 inch) to 6 mm (1/4 inch). Enhan...
The Faithfull SDS Max to SDS Plus Adaptor, with a 225mm overall length, enables the use of all SDS-plus shanked drill accessories with an SDS-Max machine. Specification: Overall Length: 225mm.
This DEWALT Keyless Chuck is a professional, heavy-duty chuck with carbide jaws for extra grip. It is suitable for DEWALT and other makes of drills. Capacity: 13mm. Fitment: 1/2 inch x 20UNF.
The Faithfull right angle drill attachment may be used with either a cordless or electric powered drill when drilling or screwdriving where access is restricted. Ideal for use in between joists whe...
The Rohm EXTRA-RV 40 Plastic Keyless Chucks are for corded and cordless drills, with or without a spindle stop, up to a maximum torque of 60Nm and up to 650 Watt. These impact-resistant, quick-acti...
PRIMA plain bearing 10mm Keyed Drill Chucks, with female mount, are widely used for hand operated percussion drilling machines - smaller and intermediate sizes. This industrial quality chuck has fu...
The Rohm PRIMA 6mm Keyed Drill Chuck, female mount, is a heavy industrial plain bearing chuck widely used for stationary and hand operated percussion drilling machines. These industrial quality chu...
The Rohm PRIMA 10mm JAC2 Keyed Drill Chuck, female mount, a heavy industrial plain bearing chuck, is widely used for stationary and hand operated percussion drilling machines. These industrial qual...
This Rohm PRIMA13mm Keyed Drill Chuck female mount JAC33 heavy industrial plain bearing chuck is widely used for stationary and hand operated percussion drilling machines. The industrial quality ch...
This Rohm 13mm SDS Hammer chuck with a rugged construction ensures extended service under the most demanding concrete drilling operations. The unique Hammerlock mechanism provides full gripping pre...
SUPRA 13mm Keyless Chuck female mount, S 3/8 x 24, is a precision industrial chuck specifically designed for high accuracy. A self tightening feature produces significantly higher gripping force to...
SUPRA 6mm Keyless Chuck, female mount, JAC1 are precision industrial chucks specifically designed for high accuracy. A self tightening feature produces significantly higher gripping force to resist...
The Rohm PRIMA 16mm Keyed Drill Chuck with female mount JAC3, a heavy industrial plain bearing chuck, is widely used for stationary and hand operated percussion drilling machines. These industrial ...
The Rohm SUPRA13mm Keyless Chuck female mount JAC6 is a precision industrial chuck specifically designed for high accuracy. It has a self tightening feature produces significantly higher gripping f...
The Rohm SUPRA 16mm Keyless Chuck female mount JAC6 is a precision industrial chuck specifically designed for high accuracy. A self tightening feature produces significantly higher gripping force t...
The Rohm PRIMA 20mm Keyed Drill Chuck, with female mount, JAC3, heavy industrial plain bearing chucks, are widely used for stationary and hand operated percussion drilling machines. These industria...