HDD/SSD Accessories (53 items)

Akyga® AK-SC-21 cord is an ATX power supply service accessory. It is equipped with 4-pin P4 connector to power the processor. The wire stands out with high durability of materials, which ensures a ...

A tape Akyga® AK-CA-06 designed to connect a hard drive or a burner to an IDE connector. Adapted to support UDMA (Ultra-DMA) 133, so that it can be used with the following interfaces: ATA133, ATA10...

Akyga® AK-CA-17 is an adapter that converts MOLEX to SATA connector. The adapter will be useful if the power supply does not have enough SATA connectors to connect new components, such as hard driv...

Akyga AK-CA-27 is a high quality cable with a SATA III connector, intended for connecting eg hard disk drives and SSDs to the computer motherboard. The cable has a length of 50 cm.

High-quality SATA III cable with a length of 50 cm allows to connect components such as HDD/SSD drives and CD/DVD devices. Setting the connector at a 90° angle makes it easier to connect to the soc...

Akyga® AK-SC-23 is a cable used to service power adapters for hard drives. The element has two female SATA and MOLEX output connectors and 4 free cables coming out of the MOLEX terminal. The cable ...

Akyga® AK-CA-12 is an adapter enabling the connection of an older generation power supply to the processor via the MOLEX socket. Used when your power supply is not equipped with a P4 connector by d...

Akyga® AK-CA-36 is a high quality power splitter, allowing connection of the fan through a 3-pin 5V connector to the MOLEX connector.

Akyga® AK-CA-14 is a MOLEX connector adapter, it can be connected to a computer power supply to obtain an additional miniMOLEX connector, while maintaining the existing MOLEX socket. Therefore, it ...

The Akyga® AK-SC-22 cable is a service element with a length of 45cm, with an 8-pin (4 + 4) EPS terminal. Used to service cables or connectors in the processor's power supply that supports the stan...

Akyga® AK-SC-20 is a service cable that allows replacement of a cable terminated with the PCI Express standard (6 + 2 pin). The PCI Express solution is used to install expansion cards on the comput...

Akyga® AK-CA-15 is a power adapter that allows you to get two female connectors from the MOLEX male connector. Particularly useful when the power supply in use does not have enough MOLEX connectors...

The Akyga® AK-SC-19 cable is a service element that allows replacement of the inoperative cable that powers the graphics card with the PCI Express 6 pin standard. The cord length is 45 cm.

Akyga® AK-CA-16 is an adapter that allows you to get two additional SATA connectors by connecting to the MOLEX socket. Particularly useful when the power supply does not have enough SATA connectors...

Akyga® AK-CA-52 is a power splitter that allows you to split one existing 3-pin connector into two single connectors of the same type. The splitter is designed for connecting fans in computer enclo...