Hook and loop type, for use with sanding discs and sanding fleece. (1 per package) 2" (50mm) Diameter. For use with the Longneck Angle Grinder LW/E, LHW/E and Longneck Angle Grinder LW/S
50mm diameter (10mm bore). Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts in non-ferro...
50mm diameter (10mm bore). 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other 'difficult' materials.
58mm diameter (10mm bore). 80 alternately set teeth. Ideal for hard and soft wood as well as plastic and Pertinax. For fast, clean cuts. Teeth are individually set and sharpened. Superior cutting p...
Synthetic resin bonded aluminum-oxide cut-off wheels for cutting metal, nonferrous metal, alloys, stainless steel, wood, plastics and some softer stones. Note: The cut-off wheel is designed for cut...
For cutting, grinding and deburring. For cutting very hard and brittle materials: glass, porcelain, non-ferrous metals, steel, ceramics, fiberglass and plastics.. Less heating up due to cooling hol...
For cutting, grinding and deburring. For cutting very hard and brittle materials: glass, porcelain, non-ferrous metals, steel, ceramics, fiberglass and plastics.. Less heating up due to cooling hol...
For cutting very hard and brittle materials: glass, porcelain, non-ferrous metals, steel, ceramics, fiberglass and plastics. - Includes Mandrel, Shank Size 3/32" (2.35mm) - Wheels Size 1-1/2" (38mm...
Cut off saw KG 50 Table moveable through 45°, allowing mitre cuts. Workpiece is fastened tightly and accurately by means of the integrated clamping device. Clamp jaws 27mm wide and maximum workpiec...
Ø 3-1/8" (80mm) x 1/32" (1.6mm), bore 13/32" (10mm). Aluminum Oxide. Maximum rating 10,000 rpm. Used for wood, steel, non-ferrous metals and plastics. For use with the 37160 Chop and Mitre Saw KGS8...
Synthetic resin bonded aluminum-oxide cut-off wheels for cutting metal, nonferrous metal, alloys, stainless steel, wood, plastics and some softer stones. Note: The cut-off wheel is designed for cut...
Aluminum Oxide with Reinforcement. Nearly unbreakable, making it usable to remove stock. Will cut alloyed, standard and stainless steels, NF metals, and even wood and plastics. Includes Mandrel, Sh...
Aluminum Oxide with Reinforcement. Nearly unbreakable, making it usable to remove stock. Will cut alloyed, standard and stainless steels, NF metals, and even wood and plastics. Includes Mandrel, Sh...
The flap disc is made from aluminum-oxide with a high stock removal rate and is ideal for grinding and smoothing of cast iron, gray cast iron, stainless steel, steel, non-ferrous metal, wood and pl...
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and r...
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and r...
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and r...
Made of standard corundum. The sanding compounds have a tough consistency and different grits for preliminary and refinishing work. Extreme toughness. Different versions for different application a...
Velcro type, used on flat and convex surfaces. (12 per package), 2" (50mm) Diameter. Use with 28548 Backing disc. For use with the Longneck Angle Grinder LW/E, LHW/E and Longneck Angle Grinder LW/S