| | | | |
Picture | | | | Order |
|
|
Texas Instruments OPA604AU Audio amplifier (2 offers) The OPA604 is a FET-input operational amplifier designed for enhanced AC performance. Very low distortion, low noise and wide bandwidth provide superior performance in high quality audio and other ... |
Texas Instruments OPA604AU |
from £ 1.676* per piece |
|
|
Texas Instruments OPA4134UA (3 offers) The OPA134 series are ultra-low distortion, low-noise operational amplifiers fully specified for audio applications. A true FET input stage is incorporated to provide superior sound quality and spe... |
Texas Instruments OPA4134UA |
from £ 3.42* per piece |
|
|
Texas Instruments OPA347NA/250 (1 offer) The OPA347 is a microPower, low-cost operational amplifier available in micropackages. The OPA347 (single version) is available in the SC-70 and SOT23-5 packages. The OPA2347 (dual version) is avai... |
Texas Instruments OPA347NA/250 |
from £ 0.72* per piece |
|
|
Texas Instruments OPA340UA Operational amplifier (3 offers) The OPA340 series rail-to-rail CMOS operational amplifiers are optimized for low-voltage, single-supply operation. Rail-to-rail input and output and high-speed operation make them ideal for driving... |
Texas Instruments OPA340UA |
from £ 1.59* per piece |
|
|
Texas Instruments OPA251UA (2 offers) The OPA241 series and OPA251 series are specifically designed for battery powered, portable applications. In addition to very low power consumption (25µA), these amplifiers feature low offset volta... |
Texas Instruments OPA251UA |
from £ 2.109* per piece |
|
|
|
Texas Instruments OPA2337EA/250 |
from £ 0.63* per piece |
|
|
Texas Instruments OPA209AID Operational amplifier (2 offers) The OPA209 series of precision operational amplifiers achieve very low voltage noise density (2.2 nV/√Hz) with a supply current of only 2.5 mA (maximum). This series also offers rail-to-rail output... |
Texas Instruments OPA209AID |
from £ 1.89* per piece |
|
|
Texas Instruments OPA177GS Operational amplifier (2 offers) The OPA177 precision bipolar op amp feature very low offset voltage and drift. Laser-trimmed offset, drift and input bias current virtually eliminate the need for costly external trimming. The high... |
Texas Instruments OPA177GS |
from £ 1.58* per piece |
|
|
Texas Instruments OPA1612AID Operational amplifier (2 offers) The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve very low 1.1-nV/√Hz noise density with an ultralow distortion of 0.000015% at 1 kHz. The OPA1611 and OPA1612 off... |
Texas Instruments OPA1612AID |
from £ 4.06* per piece |
|
|
Texas Instruments OPA140AID (2 offers) The OPA140, OPA2140, and OPA4140 (OPAx140) operational amplifier (op amp) family is a series of low-power JFET input amplifiers that features good drift and low input bias current. The rail-to-rail... |
Texas Instruments OPA140AID |
from £ 2.42* per piece |
|
|
Texas Instruments OPA134UA (3 offers) Superior Sound Quality Ultra Low Distortion: 0.00008% Low Noise: 8 nV/√Hz True FET-Input: IB = 5pA High Speed: Slew Rate: 20 V/µs Bandwidth: 8 MHz High Open-Loop Gain: 120 dB (600 Ω) Wide Supply Ra... |
Texas Instruments OPA134UA |
from £ 1.668* per piece |
|
|
Texas Instruments LMC660CM/NOPB Operational amplifier (2 offers) The LMC660 CMOS Quad operational amplifier is ideal for operation from a single supply. It operates from +5V to +15.5V and features rail-to-rail output swing in addition to an input common-mode ran... |
Texas Instruments LMC660CM/NOPB |
from £ 1.432* per piece |
|
|
|
Texas Instruments LMC6482IM/NOPB |
from £ 0.819* per piece |
|
|
|
Texas Instruments LM8261M5X/NOPB |
from £ 1.56* per piece |
|
|
Texas Instruments LM2902M/NOPB (2 offers) The LM124-N series consists of four independent, high-gain, internally frequency compensated operational amplifiers designed to operate from a single power supply over a wide range of voltages. Ope... |
Texas Instruments LM2902M/NOPB |
from £ 0.48* per piece |
|
|