Special Pliers (180 items)

:

Material Body of pliers made of high-resistance special steel, nickel-plated. Design Locking lever and rotatable magazine with hole sizes 4.0 / 4.5 and 5.0 mm and corresponding loop punches for loo...

:

Forming plier for bending flat components, contacts, power transistors, Triac connections to a right angle.

Forming pliers for component connection, U-shape.

IC and SMD tools for inserting, extracting, straightening and cutting IC and SMD components

Forming pliers suitable for bending components of Series TO 126, 218, 220 and power transistors through 90° in two rows, 3 connections

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

Cleaver is used for trimming optical fibers.

Wedge pressure depth adjustment

For joining steel sections with the thickness up to 0.8 mm Helpful when joining sections for gypsumboard Punch and matrix made from GR15 steel Head made from Al-Ti A380 alloy

Designed for manual metal sheet forming Flat jaws, knurled inside

:

TR 30: Tool for a flush cut. One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order code TR 30 A). Safety clip type AL. Steel thickness 3....

TR 25 L 25: Tool for a flush cut. The special 25° angle allows the use in difficult to reach areas and its longer handles reduce the force needed by the operator. Safety clip for holding wire scrap...

:

:

STR 50: Special tool designed to cut both straigth and angled PIN STRIP. The adjustable blade allows to set different strip pitch (min. 3 mm - max. 50 mm) Cutting blade for angled pin strip include...

PTR 30 LD: Tool that forms the component wire in a L shape and cuts off the residual part. Steel thickness 3.0mm. Tool length 150 mm. ESD-safe handles version

PTR 30 C/5D: Pliers which forms the component wire in a C shape and cuts off the residual part. Residual component lead’s length 4mm. Steel thickness 3.0mm. Tool length 150mm. ESD-safe handles

PTR 30 CD: Pliers which forms the component wire in a C shape and cuts off the residual part. Residual component lead’s length 3mm. Steel thickness 3.0mm. Tool length 150mm. ESD-safe handles

:

:

PNR 5000D: A special tool that cuts and forms the component wire in one operation. Length setting is carried out by means of a sliding stop (A min 4 max 16). Steel thickness 5.0mm. Tool length 150m...

PNR 30D: Special forming tool that C shapes the component wire. Bent at 45°. Steel thickness 3mm. Tool length 145mm ESD-safe handles

:

:

:

:

PN 5050/6D: Special pliers that enables TO220 component leads to be bent at a 90°angle in a single operation, in such a way that the central lead will be 2.54mm longer than the side leads. It is po...

PN 5050/54D: Special tool designed to form TO220 component (5 leads). It forms 1-3-5 leads at 2.54 mm pitch. Steel thickness 5.0mm. Tool length 158mm. ESD-safe handles.

PN 5050/53: Special tool designed to form TO220 component (5 leads). It forms 2-4 leads at 2.54mm pitch. Steel thickness 5.0mm. Tool length 158mm. ESD-safe handles.

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

: