unklassifiziert 4421_warehouse (186,328 items)

Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.

Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm.

The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm.

Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.

Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face plate with 30mm bore as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin ...

Individual quick-change holder which fits the tool post of the Proxxon PD 400 lathe system.

Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.

For accurate use on round components. One hardened collet each hardened collet 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 - 10 - 12 and 14mm are included. Concentric accuracy better than 0.002mm, much bette...

One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 3/64" (1.3mm), 7/64" (2.65mm) and 5/32" (4mm). Shank: 15/64" (6mm). Length: 3 3/16" (95 mm). The cutters are held by...

One each roughing out, parting, finishing cut, left and right cutter. Supplied in wooden box with sliding lid.

Proxxon pre-ground parting tool bit made of quality Cobalt HSS, designed for use with lathe systems.

Three holders (90mm long): - for roughing out; - for longitudinal work; - for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additi...

For the holders 24 555. Ten pieces set.

All cutters with 6mm shaft. Cutters of Ø 2 - 3 - 4 and 5mm. Double fluted according to DIN 327. Made of HSS. Supplied in wooden box with sliding lid.

4 cutters Ø 6 - 7 - 8 and 10mm. Four flute design according to DIN 844. Shafts 6.0 and 10.0mm respectively. Made of HSS. Supplied in wooden box with sliding lid.