7.5 / 7.62mm (119 items)

7.5mm Standard Profile Rising Clamp 2 Pole

Vertical moulded rising clamp terminal blocks with 2 poles, 7.5mm pitch.

Modular terminal blocks with push-button actuated CAGE CLAMP® - Also available with Ex e approval - Set to metric or inch pin spacing by compressing terminal strips together or pulling them apart -...

Compact terminal strips with push-buttons - Simple, push-in terminations of solid and ferruled conductors - Termination/removal of fine-stranded conductors via push-buttons - 45° conductor entry an...

These quality 2-way terminal blocks are suitable for all types of application. The terminals are housed in moulded green polyamide PA66 and approved to UL94V-0.

Commercial low profile 4-pole screw terminal block from the CamBlock Plus range by CamdenBoss. These green blocks are made from flame retardant polyamide.

Vertical moulded rising clamp terminal blocks with 3 poles, 7.5mm pitch.

7.62mm Standard Profile Rising Clamp Terminal Block 2 Pole

7.5mm Standard Profile Rising Clamp 3 Pole

These quality 3-way terminal blocks are suitable for all types of application. The terminals are housed in moulded green polyamide PA66 and approved to UL94V-0.

Low profile commercial screw terminal blocks from the CamdenBoss CTB55VK Series, with 7.5mm pitch and 2 poles, suitable for PCB mounting.

Commercial low profile 6-pole screw terminal block from the CamBlock Plus range by CamdenBoss. These green blocks are made from flame retardant polyamide.

Compact terminal strips with push-buttons - Simple, push-in terminations of solid and ferruled conductors - Termination/removal of fine-stranded conductors via push-buttons - 45° conductor entry an...

Standard profile interlocking terminal block from Camden Boss CTB0118 series with 2 poles, 7.62mm pitch.

A 3 pole 5.08mm pitch professional rising clamp terminal block designed for use on PCBs. This 90° mounted standard profile connector is ideal for use in any installation and provides a versatile wi...

Standard profile interlocking terminal block with 2 poles, 7.5mm pitch, from the Camden Boss CTB0110 Series.

Low profile commercial screw terminal blocks from the CamdenBoss CTB55VK Series, with 7.5mm pitch and 3 poles, suitable for PCB mounting.

7.5mm High Power Rising Clamp Terminal Block 3 Pole

A 3 pole 7.62mm pitch high power professional rising clamp terminal block designed for use on PCBs. This connector is ideal for use in any installation and provides a versatile wire to board connec...

Staggered 2-pole PCB terminal block from WAGO with push-in CAGE CLAMP® connection and push button actuation.

Modular terminal blocks with screwdriver-actuated CAGE CLAMP® for custom terminal strip assemblies - Also available with Ex e approval - Comb-style jumper bars for commoning and distributing potent...

Terminal strips with push-button actuated CAGE CLAMP® - Also available with Ex e approval - Set to metric or inch pin spacing by compressing terminal strips together or pulling them apart - Ideal f...

Modular terminal blocks with screwdriver-actuated CAGE CLAMP® for custom terminal strip assemblies - Also available with Ex e approval - Comb-style jumper bars for commoning and distributing potent...

This 6-pole standard profile rising clamp terminal block is part of the CamBlock Plus range from CamdenBoss. These green blocks are made from flame retardant polyamide.

Standard profile interlocking terminal block with 3 poles, 7.5mm pitch, from the CamdenBoss CTB0110 Series.

7.62mm Standard Profile Rising Clamp Terminal Block 5 Pole

Standard profile interlocking terminal block from CamdenBoss CTB0118 Series with 3 poles, 7.62mm pitch.

90° Rising clamp terminal block from the CamdenBoss CTB0115 Series, 7.5mm pitch, with 2 poles. Double interlocking mechanism for increased strength.

Compact terminal strips with push-buttons - Simple, push-in terminations of solid and ferruled conductors - Termination/removal of fine-stranded conductors via push-buttons - 45° conductor entry an...

1-conductor PCB terminal strip; 2 solder pins/pole, staggered; 3-pole; Pin spacing 7.5 mm / 0.295 in; with push-button; with test port for 1 mm Ø test pin

7.5mm High Power Rising Clamp Terminal Block 5 Pole

PCB terminal block, nominal current: 32 A, rated voltage (III/2): 630 V, nominal cross section: 4 mm², pitch: 7.62 mm, number of positions: 2, connection method: Screw connection with tension sleev...

7.62mm Standard Profile Rising Clamp Terminal Block 6 Pole

Compact terminal strips with push-buttons - Simple, push-in terminations of solid and ferruled conductors - Termination/removal of fine-stranded conductors via push-buttons - 45° conductor entry an...

Compact terminal strips with push-buttons - Simple, push-in terminations of solid and ferruled conductors - Termination/removal of fine-stranded conductors via push-buttons - 45° conductor entry an...

Standard profile 90° rising clamp PCB terminal block from the CamdenBoss CTB01HL Series, 7.62mm pitch, with 2 poles. Double interlocking mechanism for increased strength.

7.5mm High Power Rising Clamp Terminal Block 6 Pole

Standard profile interlocking terminal block with 4 poles, 7.5mm pitch, from the CamdenBoss CTB0110 Series.

90° Rising clamp terminal block from the CamdenBoss CTB0115 Series, 7.5mm pitch, with 3 poles. Double interlocking mechanism for increased strength.

Standard profile interlocking terminal block from CamdenBoss CTB0118 Series with 4 poles, 7.62mm pitch.

High power rising clamp terminal block, part of the CamdenBoss CTB07VL Series, with 3 poles, 7.62mm pitch.

PCB terminal block, nominal current: 32 A, rated voltage (III/2): 630 V, nominal cross section: 4 mm², pitch: 7.62 mm, number of positions: 3, connection method: Screw connection with tension sleev...

Standard profile 90° rising clamp PCB terminal block from the CamdenBoss CTB01HL Series, 7.62mm pitch, with 3 poles. Double interlocking mechanism for increased strength.