Probes & Test Leads - Bench/R&D (128 items)

The Aim-TTi Replacement Kelvin Clip Set BS K-Clip is a replacement Kelvin Clip Set.  It is ideal for with the BS407 Precision Micro Ohmmeter.

Serial cable HA1600, LCR400.

The Aim I-prober 520 positional current probe is unlike any other current measurement device available. It is slim, good looking and very clever. Calibrated measurement of current normally requires...

Kelvin clip test leads set (requires the BNC Adaptor).

Aim-TTi TG GPIB Interface option for TGR1040 and TGR2050.

GHT-108 HV Wiring Cable for Scanner Box HSB-001-1

GHT-109 Ground Bound Cable for Scanner Box HSB-001-1

GHT-113 HV Test Pistol for GPI/GPT-700A / 800A

GHT-205 HV Test Leads for GPI/GPT-700A / 800A

GKT-001 General Kit Set for GSP-800 Series

GKT-002 CATV Kit Set GSP-800 Series

GKT-003 RLB Kit Set for GSP-800 Series

GTL-108A 4W Type Test Lead for : GOM-801H/802,GDM-8255A/8251A

GTL-232A RS232C Cable for PSP-603 / 405 / 2010

Test fixture for measurement of both axial and vertical lead components

Because current measurement requires the insertion of a shunt or a CT, the task often becomes difficult due to breaks in the electrical path. The GW Instek Current Probe GCP-1030 only needs to be c...

This device can be directly connected to a BNC input connector of a waveform measuring instrument such as an oscilloscope or recorder, and by clamping on a conductor to be measured, allows the curr...

This device can be directly connected to a BNC input connector of a waveform measuring instrument such as an oscilloscope or recorder, and by clamping on a conductor to be measured, allows the curr...

Because current measurement requires the insertion of a shunt or a CT, the task often becomes difficult due to breaks in the electrical path. The GW Instek Current Probe GCP-530 only needs to be co...

A range of GW Instek GDP-025 high voltage differential probe offers the user a selectable attenuation setting, that makes it highly versatile. This allows it to be used a broad range of application...

A range of GW Instek GDP-050 high voltage differential probe offers the user a selectable attenuation setting, that makes it highly versatile. This allows it to be used a broad range of application...

A range of GW Instek GDP-100 high voltage differential probe offers the user a selectable attenuation setting, that makes it highly versatile. This allows it to be used a broad range of application...

The GLA-1000 Series Signal Grippers GCP-201 is used with the GLA-Series.

The GW Instek GSP-800 Series BNC Antenna ATA-001 is used with the GSP-Series.

The GW Instek GSP-800 Series Cap with Chain N GAK-002 is ideal for use with the GSP-Series.

The GW Instek GSP-800 Series near Field Probe ATA-002 is for use with the GSP-Series.

This set of GW Instek GTL-101 Test Leads - BNC to Alligator Heads combines the ever popular BNC interface with most of the commonly used test lab connection types. In this case, it is alligator cli...

This set of GW Instek GTL-103 Test Leads – Banana to Alligator Heads combines the ever popular BNC interface with most of the commonly used test lab connection types. In this case, it is Banana plu...

This set of GW Instek GTL-104A Test Leads - PSU 4-10A combines the ever popular Alligator clips with most of the commonly used test lab connection types. In this case, it is spade plugs. These test...

This set of GW Instek GTL-104A Test Leads - PSU 4-10A combines the ever popular Alligator clips with most of the commonly used test lab connection types. In this case, it is banana plugs. These tes...

This set of GW Instek GTL-107A Test Leads combines the ever popular banana plug with most of the commonly used test lab connection types. In this case, it is banana socket. These test leads are ver...

This GW Instek GTL-110 Test Lead with BNC/BNC Heads combines the ever popular BNC socket with most of the commonly used test lab connection types. In this case, it is BNC socket. This test lead is ...

This W Instek GTL-115 Test Leads combines the ever popular crocodile clip with most of the commonly used test lab connection types. In this case, it is the spade connector. This test lead is very u...

This GW Instek GTL-117 Test Leads combines the ever popular banana socket with most of the commonly used test lab connection types. In this case, it is a pencil probe. This test lead is very useful...

The GW Instek GTL-120 Test Leads is idea for use with the PEL 2000 series.

The GW Instek GTL-121 Test Leads is idea for use with the PEL 2000 series.

The GW Instek GTL-201A Ground Lead has been manufactured for testing with the GPS-X303 / PSM / GPS Series.

The GW Instek GTL-202 Sense Lead has been manufactured for testing with the PSM Series.

The GW Instek GTL-203A Europe Type has been manufactured for testing with the PSS/PST/GPC/GPS/SPS-Series.

The GW Instek GTL-204A Europe Type has been manufactured for testing with the GPC/GPS/PPE/PPS/PPT/PSM/PSP/PST-Series.

This GW Instek GTL-232 RS232C Cable is commonly found on connections between peripheral equipment such as modems and a PC, although there are many other uses. The GW Instek GTL cable has been manuf...

These GW Instek GTL-246 USB2.0 A-B Type Cable is ideal for connection of GW Instek GDS-2000 Series,GDS-1000A Series,GLA-1000 Series,GDS-800 Series although there are many other uses. The GW Instek ...

The GW Instek GTL-247 USB 1-1 type cable is a great way to extend the reach of your USB device.It is the easiest way to connect two devices without having to move all your furniture to accommodate ...

The GW Instek GTL-248 GPIB Cable is idea for use with the PEL 2000 series.

The GW Instek GTL-249 Frame Link Cable is ideal for use with the PEL 2000 series.

The GW Instek GTL-301 RF Cable is a high quality straight connector to straight connector assembly manufactured from high quality cable and fittings.

The GW Instek GTL-302 RF Cable is a high quality straight connector to straight connector manufactured from high quality cable and fittings.

The GW Instek GTL-303 RF Cable is a high quality straight connector to straight connector manufactured from high quality flexible cable and fittings.

The GW Instek GTL-304 RF Cable Assembly is a high quality straight connector to straight connector manufactured from high quality flexible cable and fittings.

This is a 150MHz (10:1) passive probe for use with digital storage oscilloscopes GDS-3152/ 3154 from the GW Instek GDS 3000 Series.

This is a 250MHz (10:1) passive probe for use with digital storage oscilloscopes GDS-3252/3254 from the GW Instek GDS 3000 Series.

This is a 350MHz (10:1) passive probe for use with digital storage oscilloscopes GDS-3352/3354 from the GW Instek GDS 3000 Series.

This is a 500MHz (10:1) passive probe for use with digital storage oscilloscopes GDS-3502/3504 from the GW Instek GDS 3000 Series.

The GW Instek GPIB to USB adaptor is used to connect a GPIB controller to the USB B receptacle on the GDS-3000 as the scope does not have a GPIB interface. The GUG-001 GPIB to USB adaptor is curren...

The GW Instek LCR-07 is a Two Wire component with Alligator Clips. The Test leads are used for conventional component measurement. GW Instek Two Wire component with Alligator Clips is especially us...

The GW Instek LCR-12 is a Measurement Fixture for LCR-8100G. This test lead with Kelvin Clip (4-wire type) is especially useful for suitable for low R or high C. This component is used with the LCR...

The GW Instek PT-100 Temperature Probe is ideal for use with the GOM-802.

The Keithley 2600-TRIAX adapter assembly provides pathways from an SMU terminal block located on the Model 260x rear panel to three separate Triax connectors.

The 4200-TRX-0.3 Ultra Low Noise Triaxial Cable Assembly is 0.3M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 4200-TRX-0.75 Ultra Low Noise Triaxial Cable Assembly is 0.75M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 4200-TRX-1 Ultra Low Noise Triaxial Cable Assembly is 1M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 4200-TRX-2 Ultra Low Noise Triaxial Cable Assembly is 2M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 4200-TRX-3 Ultra Low Noise Triaxial Cable Assembly is 3M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 7078-TRX-1 Low Noise Triaxial Cable Assembly is 0.3M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 7078-TRX-10 Low Noise Triaxial Cable Assembly is 3M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 7078-TRX-12 Low Noise Triaxial Cable Assembly is 3.6M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 7078-TRX-20 Low Noise Triaxial Cable Assembly is 6.1M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 7078-TRX-3 Low Noise Triaxial Cable Assembly is 0.9M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The 7078-TRX-5 Low Noise Triaxial Cable Assembly is 1.5M in length and consists of a standard triaxial cable terminated with a standard 3-slot male triaxial connector on each end.

The Keithley 7078-TRX-BNC is a 3-Slot Male Triax to BNC Adaptor.

The Keithley 7078-TRX-GND is a 3-slot Male Triax to Female BNC adaptor (guard removed).

Premium quality gold-plated crocodile clip adaptor leads for use with the Atlas LCR Passive Component Analyser.

A pair of extremely sharp gold-plated probes, primarily designed for the Atlas ESR, 85-2104, and Atlas ESR Plus, 85-2105. These gold-flashed needles feature Peak's standard 2mm sockets, allowing th...

A pair of high quality replacement hook probes with 2mm connectors for the Atlas LCR Passive Component Analyser.

Superb quality tweezer probes for use with the Peak Atlas LCR40 (85-2070) and LCR45 (85-2077) Passive Component Analysers.The tweezer's gold plated tips are suitable for testing a very wide range o...

The Pico TA375 is a passive, switchable oscilloscope probe with a probe bandwidth of 100MHz and BNC connector. This probe is an upgraded version that replaces TA132, and includes many improvements ...

Ground lead suitable for use with oscilloscope probe 85-1550.

Very high quality 60MHz oscilloscope probe with switchable x1 and x10 input division ratios.

This 150MHz oscilloscope probe from Rigol is compatible with all Rigol scopes. Offering a bandwidth of 150MHz and a cable length of 1.4m.

This logic probe has a memory function which can detect the occurrence of single pulses or logic level. It can detect one shot and low repeat rate narrow pulses, which are nearly impossible to see ...

The Tektronix A621 is a 2000A AC Current Probe. This industrial style clamp-on probe has a BNC connector and can be used with a shrouded banana plug adaptor so it can be used on digital multimeters...

The Tektronix A622 is a 100A AC/DC Current Probe. This long nose style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and can ...

This passive oscilloscope probe features a selection switch to select between x1 and x10 attenuation. The probe is especially suitable for applications such as: relative low frequency measurements,...

The Tektronix P2221 is a 200MHz Passive Voltage Probe that permits selection of 1x or 10x attenuation, using a switch located on the probe head. This probe will provide high reliability and accurac...

The Tektronix P3010 is a Passive Voltage Probe that has been designed to complement the Tektronix family of portable DSO instruments.

The Tektronix P5100A is a Passive High Voltage Probe that is ideal for heavy duty high performance measurements of voltages up to 2.5kV. The P5100 is a low capacitance high voltage probe designed f...

The Tektronix P5122 is a Passive High Voltage Probe that is ideal for heavy duty high performance measurements of voltages up to 1000V. In many applications, it is important to be able to isolate t...

The Tektronix P5200A is a High Voltage Differential Probe that offers a broad portfolio of high-voltage probing solutions that enables users to safely and accurately make floating measurements. The...

The Tektronix P5202A is a High Voltage Differential Probe that offers a broad portfolio of high-voltage probing solutions that enables users to safely and accurately make floating measurements. The...

The Tektronix P5205A is a High Voltage Differential Probe that offers a broad portfolio of high-voltage probing solutions that enables users to safely and accurately make floating measurements. The...

The Tektronix P5210A is a High Voltage Differential Probe that offers a broad portfolio of high-voltage probing solutions that enables users to safely and accurately make floating measurements. The...

The Tektronix P6015A is an Industry Standard High Voltage Probe that is ideal for heavy-duty high performance measurements of voltages over 2.5kV. The P6015A can measure DC voltages up to 20kVRMS a...

The Tektronix P6021A is an AC Current Probe that is ideal for general purpose applications. The P6021A provides wide-band performance with excellent low-frequency characteristics. Bandwidth is 120H...

The Tektronix P6022 AC Current Probe has a probe head size of 10mm x 6mm, (about half the size of the P6021A) and a bandwidth of 935Hz to 120MHz. The P6022 is ideal for measuring currents in compac...

The Tektronix P6139B is a 500MHz Oscilloscope Probe. This high bandwidth, high impedance probe features a small probe head and sharp tip that makes it easier to probe dense circuitry. Applications:...

The Tektronix P6245 active probe provides the electrical and mechanical performance required for today's digital systems designs. No additional power supplies or cables are required when used with ...

The Tektronix P6251 High-voltage Differential Probe is specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI™ probe interface, or TekProbe BNC I...

The Tektronix P6316 is a Digital Probe that connects to the Tektronix MSO2000 Series of mixed signal oscilloscopes.The probe breaks out 16 data channels over two 2 x 8-pin headers (GROUP 1 and GROU...

The Tektronix TCP0030A is a high-performance, easy to use AC/DC Current Probe designed for use and direct connection (without the need of an additional power supply) to the TekVPI™ probe interface....

The Tektronix TCP0150 is a high performance and easy to use 150A AC/DC Current Probe designed for use and direct connection to the TekVPI™ probe interface. This AC/DC current measurement probe prov...