Calliper & Drum Tools (56 items)

A brake adjusting wrench forged from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection.

Designed as a single-handed snap action tool for clamping off hydraulic hoses when working on braking systems. Manufactured from 90 ton tensile steel, fully heat treated with plastic coated handles...

This accurately formed diecast guide will accept bevel edged chisels or plane irons sized 3mm to 67mm, setting them at the correct angle for honing. Display packed.

To wind back the brake pistons on ABS brakes. Suitable for most Ford and Rover vehicles fitted with ABS. Display packed.

For use on small bore cylinders i.e. motor cycles etc. with capacities between 25 and 57mm. The flexible drive shaft allows easy alignment whilst working, with the honing pressure adjustable to sui...

For use on cylinders with capacities between 51 and 177mm i.e cars, vans, trucks, marine and industrial applications. The flexible drive shaft allows easy alignment whilst working, with the honing ...

The Draper 25-57mm Cylinder Hone 220 Grit Stone Set is for use on small bore cylinders i.e. motor cycles etc. with capacities between 25 and 57mm. The flexible drive shaft allows easy alignment whi...

The Draper 51-177mm Cylinder Hone 280 Grit Stone Set is for use on small bore cylinders i.e. motor cycles etc. with capacities between 51 and 177mm. The flexible drive shaft allows easy alignment w...

The Draper 51-177mm Cylinder Hone 180 Grit Stone Set is for use on small bore cylinders i.e. motor cycles etc. with capacities between 51 and 177mm. The flexible drive shaft allows easy alignment w...

The Draper 51-177mm Cylinder Hone 120 Grit Stone Set is for use on small bore cylinders i.e. motor cycles etc. with capacities between 51 and 177mm. The flexible drive shaft allows easy alignment w...

Expert Quality, ideal for one person operation. For the extraction of brake fluid from hydraulic systems - especially those with complex ABS systems, using a compressed air supply. Waste brake flui...

Satin finish Chrome Vanadium socket with knurled ring. S2 Steel Hex shaft. Suitable for the removal of brake caliper fasteners. Warning: Not for use with impact type ratchets.Model NoAK657Drive:1/2...

Long reach Chrome Vanadium Hex wrench with comfortable handle sleeve for extra leverage. Suitable for the removal of brake caliper fasteners.Model NoAK6572Nett Weight:0.17Kg

Chemically blackened steel spreader plates. An essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most ATE, Bendix, Delco and Girling calipers.Model N...

Locks the brake shoe open, allowing the shoe lining to be replaced. A must have tool for servicing front and rear brakes on Volvo commercial vehicles.