Test Probes (57 items)

A set of quality TL35B Test leads with 2mm safety probes and crocodile clips.The Amprobe TL35B test lead set contains two insulated lead wires with two threaded probe tips and two threaded crocodil...

The Cliff CL159711A is a Black 30A rated binding post from the T6 series of connectors.One connector supplied only.

The Cliff CL159721A is a Red 30A rated binding post from the T6 series of connectors.One connector supplied only.

The Cliff CL681560 is a Red 15A rated binding post from the SPT3 series of connectors.One connector supplied only.

The Cliff CL681561 is a Black 15A rated binding post from the SPT3 series of connectors.One connector supplied only.

The Cliff FCR19505RB is a pair of TPR/5 Series shrouded short test probes in red and black. Rated at 1KV CAT III, 10A, for use with 4mm plugs.

The Cliff FCR19506RB is a pair of TPR/6 Series unshrouded standard test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

The Cliff FCR19507RB is a pair of TPR/7 Series shrouded standard test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

The Cliff FCR19509RB is a pair of TPR/9 Series shrouded extended spike test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they ...

Converts a BNC scope lead to a dual banana plug for connection to a DMM. Required when adapting a shielded BNC cable, found on high-end low current clamps such as the Fluke 80i-110s, to a DMM.

In response to new ESA guidelines, Fluke introduces test probes with built-in fuses for additional measurement protection. And, if the probe fuse does blow, these probes will still allow the meter ...

Keep your test and measurement accessories always available and untangled. This is the convenient way to store your coaxial cable assemblies, patch cords and test leads. Holders mount easily on any...

Attach this small, rugged light to any Fluke test probe and see exactly what you are trying to probe.

When you attach these probe extenders to your SureGrip test probes you will move your hands 12 inches from the contact point. A probe light is included to illuminate hard-to-see contact points.

Handy, all-in-one kit that includes: AC220 SureGrip™ Alligator Clip Set TP238 SureGrip™ Insulated Test Probe Set TL222 SureGrip™ Silicone Test Lead Set (right to right)

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they ...

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they ...

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief an...

Handy all-in-one kit that includes: AC220 SureGrip™ Alligator Clip Set TP238 SureGrip™ Insulated Test Probe Set TL224 SureGrip™ Silicone Test Lead Set (straight to right)

Product overview: Fluke TL238 SureGrip™ Test Lead Set for High Energy Environments An accessory kit especially designed for working in high energy environments. The SureGrip™ Test Probe has only 4 ...

Large jaws, long leads and a piercing needle inside the jaws. Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth. Large piercing needle for penetrating larg...

This basic electronic test lead kit has the fundamental accessories for testing electronics. Includes the Fluke TL71 premium test lead set. Buy Online Now.

Very small 1 mm tips to access hard to reach test points Probe tip length up to 100 mm, test lead length: 1 m 3 sets of spring loaded gold tips and 2 sets of stainless steel tips included CAT II 10...

Test leads are an integral part of the complete measurement system. Worn out test leads can cause inaccurate readings and pose serious shock or electrocution hazard. The Fluke TLK-225 SureGrip™ Mas...

Complete set of test and measurement accessories designed especially for automotive specialists. Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or...

Everything you can find in the TLK281 Automotive Test Lead Kit, plus a few extras. Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and MAP sensors. A hook probe...

The Fluke TLK289 - Industrial Master Test Lead Set is designed for electrical and electronics testing in today’s industrial environment. Fluke test leads, alligator clips and test probes broaden th...

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber over moulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they...

Fluke TP81 Insulation Piercing Clip Set - Network adapter - banana to piercing pin clip (pack of 2)

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or...

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire. A sharp point ensures good contact to the electrical connector, and th...

Professional quality black rigid probes from PJP with finger guard and rear 4mm socket.

Professional quality red rigid probes from PJP with finger guard and rear 4mm socket.

A pair of high quality multimeter test leads from PJP suitable for meters with shrouded type 4mm connectors.

This precision kit has been designed for the testing of surface mount and high density circuits.

Professional grade black test lead from PJP employing 1m of highly flexible 384/0.05mm silicone cable terminated at one end with a rigid shrouded probe and a fixed sheath shrouded 4mm plug at the o...

High quality fused test probe set from PJP.

These safety test probe clips from PJP have an insulated flexible shaft.

These safety test probe clips from PJP have an insulated flexible shaft.

The R-TECH 524601 4mm Test Probe, CAT II, 1000V, 32A, Black is a test probe with a spring loaded tip and a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed f...

The R-TECH 524602 4mm Test Probe, Red is a test probe with a spring loaded tip and a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed for use with the R-TECH...

The R-TECH 524605 4mm Flexible Safety Probe 30V, 10A Red is a good quality flexible test probe with a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed for us...