 | | | | |
| Picture | | | |
|
|
|
|
SPI 13/16in Inspection Gauge Ball (1 offer) Ground and lapped. Chrome steel hardened to 63 RC. Grade 25 accuracy - AFBMA Certified. Certificate not supplied with individual gauge balls. |
|
£ 2.22*
per piece |
|
|
SPI 7/8in Inspection Gauge Ball (1 offer) Ground and lapped. Chrome steel hardened to 63 RC. Grade 25 accuracy - AFBMA Certified. Certificate not supplied with individual gauge balls. |
|
£ 2.44*
per piece |
|
|
SPI 15/16in Inspection Gauge Ball (1 offer) Ground and lapped. Chrome steel hardened to 63 RC. Grade 25 accuracy - AFBMA Certified. Certificate not supplied with individual gauge balls. |
|
£ 2.67*
per piece |
|
|
SPI 1in Inspection Gauge Ball (1 offer) Ground and lapped. Chrome steel hardened to 63 RC. Grade 25 accuracy - AFBMA Certified. Certificate not supplied with individual gauge balls. |
|
£ 2.33*
per piece |
|
|
|
|
£ 62.31*
per piece |
|
|
SPI 1/4 - 6-1/4in Planer and Shaper Gauge (1 offer) Sets shaper and planer tools quickly and easily. Sets the gauge with calliper, micrometer or surface gauge. Use with a dial indicator and large level plates for planing. 6-1/4 in Maximum range with... |
|
£ 193.28*
per piece |
|
|
SPI 29° Angle Acme Screw Pitch Gauge (1 offer) For grinding and setting tools when cutting Acme threads. Angles and edges hardened and ground. Pitches included: 1, 1 1/3, 1 1/2, 1 3/4, 2, 2 1/2, 3, 4, 5, 6, 7, 8, 9 and 10. |
|
£ 28.85*
per piece |
|
|
SPI 0.010 - 0.150inTaper Gauge (1 offer) Especially useful for bearing work and gagging slots. Made of quality tool steel. 7/16 in (11mm) wide by 6 1/4 in (160mm) Long. |
|
£ 66.40*
per piece |
|
|
SPI 1/16- 1-1/16in 4 Leaf Taper Gauge (1 offer) For rapid, accurate checking of inside diameters of tubing. Thin, tapered leaves graduated to measure inside diameters or widths from 1/16 in to 64ths of an inch. Approximately 1 in wide. |
|
£ 73.31*
per piece |
|
|
SPI 0.010 - 0.500in 8 Leaf Taper Gauge (1 offer) Used for determining hole sizes in dies and all kinds of other work. They read in thousandths of an inch or 0.02mm. Made of tempered steel. Have a locking device for fixing any leaf position for use. |
|
£ 78.04*
per piece |
|
|
SPI 2-12in 8 Leaf Taper Gauges (1 offer) Used for determining hole sizes in dies and all kinds of other work. They read in thousandths of an inch or 0.02mm. Made of tempered steel. Have a locking device for fixing any leaf position for use. |
|
£ 76.39*
per piece |
|
|
SPI 1-45° 20 leaf Angle Gauge Set (1 offer) Use to quickly check angles. Can be used instead of a protractor. Has 20 leaves, each with a different angle. Made of finest hardened spring steel. Dimensions: 3 5/8 in long x 51/64 in wide x 1/4 i... |
|
£ 26.33*
per piece |
|
|
SPI Nonferrous Wire Gauge (1 offer) Heavy gauge. Hardened Steel. Diameter: 3 1/4 in x 1/8 in thick. Individually enveloped. Decimal equivalents stamped on reverse side. |
|
£ 23.99*
per piece |
|
|
|
|
£ 9.28*
per piece |
|
|
|
|
£ 23.43*
per piece |
|
