 | | | | |
Picture | | | | Order |
|
|
|
|
£ 23.46*
per piece |
|
|
Eclipse 1/16 x 4in Parallel Pin Punch (1 offer) Parallel pin punch is used to punch out pins and dowels. Knurling is clean and well cut to provide a positive grip. Manufactured from high quality carbon spring steel, which is hardened and tempered. |
|
£ 6.68*
per piece |
|
|
Eclipse 1/4 x 4in Round Head Centre Punch (1 offer) Centre punch is used to indent, mark, scribe lines and to make indentations in workpieces prior to drilling. Punch point accurately ground to an angle of 90°. |
|
£ 6.90*
per piece |
|
|
Eclipse 1/8 x 4in Parallel Pin Punch (1 offer) Parallel pin punch is used to punch out pins and dowels. Knurling is clean and well cut to provide a positive grip. Manufactured from high quality carbon spring steel, which is hardened and tempered. |
|
£ 5.09*
per piece |
|
|
Eclipse 1/8 x 4in Round Head Centre Punch (1 offer) Centre punch is used to indent, mark, scribe lines and to make indentations in workpieces prior to drilling. Punch point accurately ground to an angle of 90°. |
|
£ 6.91*
per piece |
|
|
Eclipse 120mm Automatic Centre Punch (1 offer) Automatic centre punch delivers a punch when hand pressure applied to knurled head. One handed operation, hammer should not be used. Depth of impression adjusted by turning knurled head. |
|
£ 29.22*
per piece |
|
|
Eclipse 3/16 x 4in Parallel Pin Punch (1 offer) Parallel pin punch is used to punch out pins and dowels. Knurling is clean and well cut to provide a positive grip. Manufactured from high quality carbon spring steel, which is hardened and tempered. |
|
£ 5.51*
per piece |
|
|
Eclipse 3/16 x 4in Round Head Centre Punch (1 offer) Centre punch is used to indent, mark, scribe lines and to make indentations in workpieces prior to drilling. Punch point accurately ground to an angle of 90°. |
|
£ 6.67*
per piece |
|
|
Eclipse 3/32 x 4in Parallel Pin Punch (1 offer) Parallel pin punch is used to punch out pins and dowels. Knurling is clean and well cut to provide a positive grip. Manufactured from high quality carbon spring steel, which is hardened and tempered. |
|
£ 6.69*
per piece |
|
|
Eclipse 3/8 x 6in Parallel Pin Punch (1 offer) Parallel pin punch is used to punch out pins and dowels. Knurling is clean and well cut to provide a positive grip. Manufactured from high quality carbon spring steel, which is hardened and tempered. |
|
£ 10.57*
per piece |
|
|
|
|
£ 0.2183*
per piece |
|
|
Eclipse 5/16 x 6in Parallel Pin Punch (1 offer) Parallel pin punch is used to punch out pins and dowels. Knurling is clean and well cut to provide a positive grip. Manufactured from high quality carbon spring steel, which is hardened and tempered. |
|
£ 8.78*
per piece |
|
|
Eclipse 5/32 x 4in Parallel Pin Punch (1 offer) Parallel pin punch is used to punch out pins and dowels. Knurling is clean and well cut to provide a positive grip. Manufactured from high quality carbon spring steel, which is hardened and tempered. |
|
£ 5.53*
per piece |
|
|
Eclipse 5/32 x 4in Round Head Centre Punch (1 offer) Centre punch is used to indent, mark, scribe lines and to make indentations in workpieces prior to drilling. Punch point accurately ground to an angle of 90°. |
|
£ 6.66*
per piece |
|
|
|
|
£ 0.3327*
per piece |
|
|
