The B-G474E-DPOW1 Discovery kit is a digital power solution and a complete demonstration and development platform for the STMicroelectronics STM32G474RET6 microcontroller. Leveraging the new HRTime...
The EVL150W-HVSL is an evaluation board of a150 W / 1 A LED driver with wide input mains range. The electrical specification is tailored on a typical high-power street lighting application. It is b...
The STMicroelectronics (THD) in fly back converter operating in Transition mode (Quasi-Resonant).Fast start-up and protections with auto-restart are available for safe operation in lighting environ...
From integrated smart power actuator drivers and power management devices to high-end 32-bit Flash MCUs, ST offers an unparalleled platform of advanced technologies combined with a thorough underst...
This demonstration board provides a complete solution for driving 40 high-brightness green LEDs manufactured by Toshiba. The high-brightness LEDs are arranged on the board in a 5x8 matrix. The matr...
This demonstration board is based on the LED7706 and implements a high efficiency monolithic boost converter and six controlled current generators (rows) specifically designed to supply LEDs arrays...
This demonstration boards is based on the LED7707 and implements a high efficiency monolithic boost converter and six controlled current generators (rows) specifically designed to supply LEDs array...
The purpose of the STEVAL-ILL035V1 demonstration board is to provide an application example of a compact LED backlight driver using the LED7708 device. The board is equipped with a 16-channel LED d...
The STEVAL-ILL035V2 product evaluation board is an extension (daughterboard) of the STEVAL-ILL035V1 (motherboard) based on the LED7708 LED driver. It allows implementation of a daisy-chained config...
The STEVAL-ILL046V1 evaluation board is based on the ST1CC40, which is an 850 kHz fixed switching frequency monolithic step-down DC-DC converter designed to operate as a precise constant current so...
The purpose of this product evaluation board is to provide an application example of a compact LED driver using the new LED6001 chip from STMicroelectronics. The board is equipped with a single-cha...
The purpose of the STEVAL-ILL051V2 evaluation board is to aid in the evaluation of the LED2000, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter. The LED2000 is designed to...
The STEVAL-ILL053V2 evaluation board implements a 130 W LED power supply for street lighting. The circuit is composed of two stages: a front-end PFC using the L6562AT, and an LLC resonant converter...
The purpose of the STEVAL-ILL054V1 evaluation board is aid in the evaluation of the LED2001, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter. The LED2001 is designed to op...
The purpose of the STEVAL-ILL054V2 evaluation board is to aid in the evaluation of the LED2001, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter. The LED2001 is designed to...
The STEVAL-ILL055V1 is an isolated SMPS designed in high power factor flyback topology. It generates a 640 mA nominal output current, delivering up to 11 W of output power and provides a cost-effec...
The STEVAL-ILL056V1 is a product evaluation board based on the LED5000, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter designed to operate as a precise constant current s...
The STEVAL-ILL061V1 is a high brightness RGB LED array driver system evaluation board with local dimming and diagnostics based on LED1642GW independent PWM LED driver controlled through an STM32 mi...
High Brightness LED Array Driver, STMicroelectronics. The STEVAL-ILL062V1 Evaluation Board is based on the 16-channel, constant current LED sink driver STP16CPC26 from STMicroelectronics. An 8-bit ...
3A LED Driver (LED5000 in Floating Boost Topology), STMicroelectronics. The STEVAL-ILL063V1 is an Evaluation Board based on the LED5000, a step-down current source with dimming capability. The adju...
based on STLUX385A digital controller high efficiency (92%) primary side controlled up to 100 W (100 V at 1 A or 200 V at 0.5 A) single isolated output suitable for LED connection wide input voltag...
The purpose of this evaluation board is to provide an application example of a six-channel, medium-current LED driver using the ALED7707 chip. The monolithic boost converter provides the required L...
The STEVAL-ILL069V2 supplies a stable and insulated 48 V voltage bus suitable for secondary side circuitry (e.g., LED current generators) for a total output power of 35 W when a wide range of input...
The STEVAL-ILL073V1 is a high brightness, RGB LED array driver system evaluation board with local dimming and diagnostics based on the ALED1642GW independent PWM LED driver controlled through an ST...
The STEVAL-ILL074V1 provides a stable and insulated 52 V voltage bus suitable for secondary side circuitry (e.g., LED current generators), for a total output power of 60 W, given a wide input volta...
The STEVAL-ILL075V1 evaluation board is designed to help familiarize the user with the STLUX family of digital controllers and their innovative SMED (state machine, event driven) architecture. A co...
This board implements an offline power converter based on a single stage high-PF flyback topology using the HVLED001A controller. A very slim form factor is achieved with innovative magnetic compon...
The STEVAL-ILL078V1 product evaluation board is based on the LED6000 monolithic current source for high power LED driving. Digital dimming is implemented by driving the dedicated DIM pin. Low drop-...
STEVAL-ILL079V1 LED Driver Eval Board for LED6000. The STMicroelectronics STEVAL-ILL079V1 is an inverting buck-boost LED driver evaluation board. The board features the LED6000 current regulator. T...
The STEVAL-ILL084V1 product evaluation board is based on the LED6000 monolithic current source for high power LED driving. The floating boost topology can benefit from the LED6000 wide input voltag...
The STEVAL-ILL088V1 evaluation board is based on a monolithic current source for high power LED driving, the LED6000, a 61 V asynchronous switching regulator. With embedded power MOSFET, it is desi...
The STMicroelectronics STEVAL-ILL089V1 evaluation board is based on the ALED6000 monolithic current source for high power LED driving. Digital dimming is implemented by driving the dedicated DIM pi...
LED Technology = LED Driver Kit Classification = Evaluation Kit For Use With = Direct switch Featured Device = STM8 MCU. Kit Name = ST Eval Board STEVAL-ILL090V1
The STEVAL-LLL004V1 digitally controlled constant current LED driver reference design features a PFC stage and two DC-DC converters designed to work in transition mode (TM) for optimal efficiency. ...
The STP16CPC26 low voltage 16-bit constant current LED sink driver on the STEVAL-LLL005V1 evaluation board ensures a cost effective 6x10 LED matrix with individual LED control. The LED driver evalu...
The STEVAL-LLL006V1 board is designed to help you evaluate high power LED lighting solutions with comprehensive power management and wireless connectivity. The board integrates an intelligent power...
The STEVAL-LLL007V1 kit consists of the STEVAL-LLL007M1 main board and the STEVAL-LLL007D1 and STEVAL-LLL007D2 panel boards. o help you evaluate all the features of the LED1202 driver, you can conn...
The ST Microelectronics Lighting Eval Boards is the most sought after solution for industrial applications like Power Electronics, Automation, and Microcontroller processing.Meets the Electrical Re...
The STMicroelectronics STEVAL-LLL010V1 kit consists of a two-sided LED panel board and separate control board with MCU and several user interface buttons. Each side of the LED board has an embedded...
The STMicroelectronics STEVAL-LLL011V1 is a compact 16 RGB LED board driven by four LED120212-Channel low quiescent current LED drivers and STM32L073 microcontroller to run user scripts for LED eff...
The STMicroelectronics STEVAL-LLL012V1 smart LED driver reference design is composed of a power board and a connectivity board.35 W LED driver with high power factor Wireless connectivity using BLE...
The STEVAL-TLL012V1 demonstration board demonstrates the performance of the STP4CMP, a charge pump based 4-channel LED driver designed for RGB illumination or LCD display backlighting. This device ...
The ON Semiconductor lighting platform is used for LED control which has a extremely energy efficient and wireless control (on/off, dimming) and two independently controlled LED channels that provi...
The ON Semiconductor lighting platform is used for LED control which has a extremely energy efficient and wireless control (on/off, dimming) and two independently controlled LED channels that provi...