Base Parts for LENA ; LENINA Reflectors. This range of base parts from LEDiL consists of base parts and adapters for use with LENA and LENINA LED reflectors. They position and hold the LED in place...
The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED.. Base Parts for ANGELA ; ANGELIN...
Te Connectivity Z50 LED Array Holder Accessory. The Z50 Reflector Optics Retaining Clip Model 1 for use with LED Array Modules from Citizen, Philips and Samsung.
TE Connectivity (TE) introduces a LUMAWISE LED holder product extension for Bridgelux®Vesta® series dim-to-warm COB LEDs. LUMAWISE LED holders are market proven providing a reliable electrical and ...
The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED.. Base Parts for ANGELA ; ANGELIN...
Te Connectivity Z50 LED Array Holder Accessory. The Z50 Reflector Optics Retaining Clip Model 1 for use with LED Array Modules from Citizen, Philips and Samsung.
Base Parts for LENA ; LENINA Reflectors. This range of base parts from LEDiL consists of base parts and adapters for use with LENA and LENINA LED reflectors. They position and hold the LED in place...
Base Parts for LENA ; LENINA Reflectors. This range of base parts from LEDiL consists of base parts and adapters for use with LENA and LENINA LED reflectors. They position and hold the LED in place...
Base Parts for LENA ; LENINA Reflectors. This range of base parts from LEDiL consists of base parts and adapters for use with LENA and LENINA LED reflectors. They position and hold the LED in place...
Molex Citizen CLL LED Array Holders. The Molex LED Array Holders for Citizen CLL CoB's are ideal for OEM light-fixture manufacturers by simplifying the LED installation process and reducing install...
For Use With = LUMAWISE Endurance S Series Receptacle Dimensions = 43.5 (Dia.) x 15.5mm Length = 15.5mm Width = 43.5 (Dia.)mm Series = LUMAWISE Endurance S
ILS have a range of different types of end caps to be used with their range of Intelligent Neon Flexible LED Strips. This allows the Neon Strips to be cut and mounted In any way required. Available...
ILS have a range of different types of end caps to be used with their range of Intelligent Neon Flexible LED Strips. This allows the Neon Strips to be cut and mounted In any way required. Available...
ILS have a range of different types of end caps to be used with their range of Intelligent Neon Flexible LED Strips. This allows the Neon Strips to be cut and mounted In any way required. Available...
ILS have a range of different types of end caps to be used with their range of Intelligent Neon Flexible LED Strips. This allows the Neon Strips to be cut and mounted In any way required. Available...
TE Connectivity Citizen CLL LED Array Holders. A range of LED Array Holders with Snap-in retention and Poke-in wire connection for rapid solderless assembly: ; 793-2844 793-2844 Z50 Holder for Citi...
LED Array Holders for LUXEON 1204/1205/1208 Series or Sharp Mega Zenigata - TE Connectivity. A range of LED Array Holders with Snap-in retention and Poke-in wire connection for rapid solderless ass...
Enables compliancy to Zhaga book 3 standard. TE Connectivity LUMAWISE Type Z50 Solderless LED Holders. LUMAWISE Type Z50 circular LED holders that provide a solderless electrical connection to LED ...
Maximum single run 4 metres when using standard PS1 input cable and F180 connections. PowerLED drivers and Connect connections must be used to provide power for the Connect series of LED light bars...
Base Parts for LENA ; LENINA Reflectors. This range of base parts from LEDiL consists of base parts and adapters for use with LENA and LENINA LED reflectors. They position and hold the LED in place...
Molex SlimRay™ Pre-Wired LED Array Holders for Lumileds LUXEON. SlimRay™ pre-wired LED array holders with a low profile stepped design for use with Lumileds LUXEON and similar next generation COB a...
ILS have a range of different types of Intelligent Neon Flexible LED Strips. These brackets are for use in mounting these strips. They clip on to the product as the image shows, and are supplied in...
Maximum single run 4 metres when using standard PS1 input cable and F180 connections. PowerLED drivers and Connect connections must be used to provide power for the Connect series of LED light bars...
Molex Nichia LED Array Holders. Molex ‘s LED Array Holders are ideal for OEM light-fixture manufacturers, they simplify the Nichia CoB-L LED installation process and reduce installation time throug...
The Ledil HEKLA series base part is made of polybutylene terephthalate(PBT) and has screw fastening. This holder is compatible with COBs of 19 x 19 mm packages and max 17mm LES size.Colour is White...
The Ledil HEKLA series base part is made of polybutylene terephthalate(PBT) and has screw fastening. This holder is compatible with COBs of 15.85 x 15.85mm packages and max 10.7 mm LES size.Colour ...
The Ledil HEKLA series base part is made of polybutylene terephthalate(PBT) and has screw fastening. This holder is compatible with COBs of 13.35 x 13.35mm packages and max 7.5 mm LES size.Colour i...
The Ledil HEKLA series base part is made of polybutylene terephthalate(PBT) and has screw fastening. This holder is compatible with COBs of 13.5 x 13.5 mm packages and max 11.6mm LES size.Colour is...
The Ledil HEKLA series base part is made of polybutylene terephthalate(PBT) and has screw fastening. This holder is compatible with COBs of 16 x 19 mm packages and max 14 mm LES size.Colour is Whit...
For Use With = LUMAWISE Endurance S Series Receptacle Dimensions = 43.5 (Dia.) x 16.5mm Length = 16.5mm Width = 43.5 (Dia.)mm Series = LUMAWISE Endurance S